Gateway MQTT first launch
-
Hello,
I developed a library that allows you to modify and store the parameters of the #define sketches in eeprom when launching a module. Thus no need for IDE, compilation and upload.
It works well with all nodes but with an MQTT gateway it is waiting to find the MQTT broker to start the program.
But the first time, the parameters are, of course, not entered.
An idea to work around this problem?
Thank you. -
Hello,
I developed a library that allows you to modify and store the parameters of the #define sketches in eeprom when launching a module. Thus no need for IDE, compilation and upload.
It works well with all nodes but with an MQTT gateway it is waiting to find the MQTT broker to start the program.
But the first time, the parameters are, of course, not entered.
An idea to work around this problem?
Thank you. -
Thank you for the idea.
I try and I will do a report.But is there a way to start the sketch after a delay even if the gateway does not find the broker.
I understand that this is not very interesting .... except for my library.
With a node, it is possible to start the sketch after a delay with the parameter MY_TRANSPORT_WAIT_READY_MS.Thank you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login