Blink on nodeMCU / RFM69 gateway
-
My gateway works fine with the vanilla wiring as per RFM69/95 & ESP8266 at https://www.mysensors.org/build/connect_radio and the example GatewayESP8266MQTTClient sketch.
I have tried adding the Radio Traffic LEDs as per https://www.mysensors.org/build/advanced_gateway but whichever available pins I use:
D2 / D3 / D4 : leds blink but comms to nodes seem to fail with NOACK
D9 / D10 : seems to work but lose serial output for debug.I expect someone has made this work before - what am I doing wrong?
Thanks
Richard
-
My gateway works fine with the vanilla wiring as per RFM69/95 & ESP8266 at https://www.mysensors.org/build/connect_radio and the example GatewayESP8266MQTTClient sketch.
I have tried adding the Radio Traffic LEDs as per https://www.mysensors.org/build/advanced_gateway but whichever available pins I use:
D2 / D3 / D4 : leds blink but comms to nodes seem to fail with NOACK
D9 / D10 : seems to work but lose serial output for debug.I expect someone has made this work before - what am I doing wrong?
Thanks
Richard
@rmh same here
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login