Raspberry gateway - radio problems
-
Hi,
I have build the Raspberry PI 3 b+ gateway project as here https://www.mysensors.org/build/raspberry
unfortunately the radio won't work. I have checked the wires multiple times but I think I did look to oftenI used:
./configure --my-transport=nrf24 --my-gateway=ethernet --my-controller-ip-address=192.168.10.5
then
make sudo ./bin/mysgw
Nov 18 12:51:39 INFO Starting gateway... Nov 18 12:51:39 INFO Protocol version - 2.3.0 Nov 18 12:51:39 DEBUG MCO:BGN:INIT GW,CP=RNNGL-Q-,VER=2.3.0 Nov 18 12:51:39 DEBUG TSF:LRT:OK Nov 18 12:51:39 DEBUG TSM:INIT Nov 18 12:51:39 DEBUG TSF:WUR:MS=0 Nov 18 12:51:39 DEBUG !TSM:INIT:TSP FAIL Nov 18 12:51:39 DEBUG TSM:FAIL:CNT=1 Nov 18 12:51:39 DEBUG TSM:FAIL:DIS Nov 18 12:51:39 DEBUG TSF:TDI:TSL Nov 18 12:51:49 DEBUG TSM:FAIL:RE-INIT Nov 18 12:51:49 DEBUG TSM:INIT Nov 18 12:51:49 DEBUG !TSM:INIT:TSP FAIL Nov 18 12:51:49 DEBUG TSM:FAIL:CNT=2 Nov 18 12:51:49 DEBUG TSM:FAIL:DIS Nov 18 12:51:49 DEBUG TSF:TDI:TSL Nov 18 12:51:59 DEBUG TSM:FAIL:RE-INIT Nov 18 12:51:59 DEBUG TSM:INIT Nov 18 12:51:59 DEBUG !TSM:INIT:TSP FAIL Nov 18 12:51:59 DEBUG TSM:FAIL:CNT=3 Nov 18 12:51:59 DEBUG TSM:FAIL:DIS Nov 18 12:51:59 DEBUG TSF:TDI:TSL Nov 18 12:52:09 DEBUG TSM:FAIL:RE-INIT Nov 18 12:52:09 DEBUG TSM:INIT Nov 18 12:52:09 DEBUG !TSM:INIT:TSP FAIL Nov 18 12:52:09 DEBUG TSM:FAIL:CNT=4 Nov 18 12:52:09 DEBUG TSM:FAIL:DIS Nov 18 12:52:09 DEBUG TSF:TDI:TSL
-
@martim looks to me that the grey and purple wires have switched positions on the radio?
-
@mfalkvidd thanks!! I have looked three times , i guess too tired.
-
Sometimes a fresh pair of eyes is exactly what's needed