fody weather station

[Stephen205]

Re: [fody weather station](wind sensor)

I found one of these on ebay for €26 and then found this thread
https://forum.mysensors.org/topic/6645/fody-weather-station-wind-sensor
WOW did that just save me loads of time.

At the moment I am happy that everything is working ok with the unit and sending the data to the gateway, But...
I am trying to get the data into iobroker and it all works apart from the wind direction.

iobroker shows the node wind with only V_GUST and V_WIND but not V_DIRECTION

1871203 TSF:MSG:SEND,1-1-0-0,s=200,c=1,t=8,pt=7,l=5,sg=0,ft=0,st=OK:0.3
Wind speed: 0.27
1871212 TSF:MSG:SEND,1-1-0-0,s=200,c=1,t=9,pt=7,l=5,sg=0,ft=0,st=OK:29.7
Wind gust: 29.65
1871221 TSF:MSG:SEND,1-1-0-0,s=200,c=1,t=10,pt=7,l=5,sg=0,ft=0,st=OK:180
Wind direction: 180
1871228 TSF:MSG:READ,0-0-1,s=200,c=1,t=8,pt=7,l=5,sg=0:0.3
1871235 TSF:MSG:ACK
1871237 TSF:MSG:READ,0-0-1,s=200,c=1,t=9,pt=7,l=5,sg=0:29.7
1871242 TSF:MSG:ACK
1871255 TSF:MSG:READ,0-0-1,s=200,c=1,t=10,pt=7,l=5,sg=0:180
1871260 TSF:MSG:ACK

Can anyone point me in the right direction to sort this out?
Thanks in advance

I have tried the iobroker forum without luck.

[Stephen205]

@stephen205

I have looked in the iobroker/mysensors/getmeta.js

line 10 'S_WIND': {index: 9, role: 'direction', vars: ['V_WIND', 'V_GUST']},

Is V_DIRECTION supposed to be included there and could that be the cause of the problem?

[Stephen205]

So i have given up with iobroker and used FHEM instead, worked well first time.