Serial Gateway + MySensor working but devices not added in Domoticz

[FrankVK]

Hi,

Just got the MySensors Serial Gateway (Arduino Pro Mini (328) & NRF24L01) working with my first sensor (Arduino Pro Mini & NRF24L01 & DHT22). Running in DEBUG mode.
When debugging the Gateway, I can see the values:

..
0;255;3;0;14;Gateway startup complete.
0;255;0;0;18;2.3.1
0;255;3;0;9;73 MCO:BGN:STP
0;255;3;0;9;96 MCO:BGN:INIT OK,TSP=1
0;255;3;0;9;104 TSM:READY:NWD REQ
0;255;3;0;9;149 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:
0;255;3;0;9;8488 TSF:MSG:READ,1-1-0,s=0,c=1,t=1,pt=7,l=5,sg=0:53.3
1;0;1;0;1;53.3
0;255;3;0;9;71725 TSF:MSG:READ,1-1-0,s=1,c=1,t=0,pt=7,l=5,sg=0:21.8
1;1;1;0;0;21.8
0;255;3;0;9;71743 TSF:MSG:READ,1-1-0,s=0,c=1,t=1,pt=7,l=5,sg=0:53.2
1;0;1;0;1;53.2
0;255;3;0;9;134963 TSF:MSG:READ,1-1-0,s=0,c=1,t=1,pt=7,l=5,sg=0:53.4
1;0;1;0;1;53.4
0;255;3;0;9;198199 TSF:MSG:READ,1-1-0,s=1,c=1,t=0,pt=7,l=5,sg=0:21.7

From Domoticz, I can see the Gateway and the Child nodes. The values are also read.
However, no device is added..


Any suggestions?

Regards, Frank

[mfalkvidd]

@frankvk the data looks good. Are you saying that there are no rows for this node on the Devices page?

[FrankVK]

Yes Mikael, but it suddenly hit me that you have to allow Domoticz to add new devices from the console. I can see the Temperature and the Humidity now!

Thanks again!