Raspberry GW rfm95 wont work

[GeforceGamer]

Hi,
I use an The Dragino LoRa/GPS_HAT and an Adafruit rfm95 Modul. But I can't get any of them to work on my Raspberry. Are there any specific wiring or configuration for them?

For the Adafruit I used this wiring:
5V -> 5V
GND -> GND
G0 -> 22
SCK -> 23
MISO -> 21
MOSI -> 19
CS -> 24
RST -> GND

[mfalkvidd]

Congrats on your first post @geforcegamer :)

The wiring looks good.
What does the debug log say?

[GeforceGamer]

Here the debug log:

pi@raspberrypi:~/MySensors $ sudo ./bin/mysgw
Feb 12 11:34:17 INFO  Starting gateway...
Feb 12 11:34:17 INFO  Protocol version - 2.3.2-beta
Feb 12 11:34:17 DEBUG Serial port /dev/ttyMySensorsGateway (115200 baud) created
Feb 12 11:34:17 DEBUG MCO:BGN:INIT GW,CP=RLNGL---,REL=3,VER=2.3.2-beta
Feb 12 11:34:17 DEBUG TSF:LRT:OK
Feb 12 11:34:17 DEBUG TSM:INIT
Feb 12 11:34:17 DEBUG TSF:WUR:MS=0
Feb 12 11:34:17 DEBUG !TSM:INIT:TSP FAIL
Feb 12 11:34:17 DEBUG TSM:FAIL:CNT=1
Feb 12 11:34:17 DEBUG TSM:FAIL:DIS
Feb 12 11:34:17 DEBUG TSF:TDI:TSL
Feb 12 11:34:27 DEBUG TSM:FAIL:RE-INIT
Feb 12 11:34:27 DEBUG TSM:INIT
Feb 12 11:34:27 DEBUG !TSM:INIT:TSP FAIL
Feb 12 11:34:27 DEBUG TSM:FAIL:CNT=2
Feb 12 11:34:27 DEBUG TSM:FAIL:DIS
Feb 12 11:34:27 DEBUG TSF:TDI:TSL

Where can I find the pins in the config? I think there is something wrong.