Get string data

[C.r.a.z.y.]

String sentData = ""
send: 51-51-0-0 s=1,c=1,t=2,pt=2,l=2,st=ok:1

How can i put this serial monitor print to sentData ?

[C.r.a.z.y.]

Is it impossible?

[hek]

@C.r.a.z.y.

Sorry, I don't understand.

[BulldogLowell]

@C.r.a.z.y. said:

String sentData = ""
send: 51-51-0-0 s=1,c=1,t=2,pt=2,l=2,st=ok:1

How can i put this serial monitor print to sentData ?

are you looking to log these serial outputs as Strings?

[C.r.a.z.y.]

@BulldogLowell Yes

[C.r.a.z.y.]

Maybe i am asking wrong;
If there is "fail"

send: 51-51-0-0 s=1,c=1,t=2,pt=2,l=2,st=fail:0

it will reboot

if (re.indexOf("fail") >=0)
{
asm volatile (" jmp 0"); //reboot
}

Why i need this; because i cant turn on or off my lights when sketch failed.

[funky81]

@C.r.a.z.y.

@C.r.a.z.y. said:

if (re.indexOf("fail") >=0)
{
asm volatile (" jmp 0"); //reboot
}

sorry for asking this, but is this the code for reboot?
does it work?

[C.r.a.z.y.]

Maybe one day someone will use this;

**When sketch fails second push will work without gateway and it will restart
**

void loop()
{
gw.process();
debouncer.update();
value = debouncer.read();

if (value != oldValue && value==0) {
if (re!="1")
{
int oku=digitalRead(RELAY_PIN);
if(oku==1)
{
digitalWrite(RELAY_PIN,0);
}
else
{
digitalWrite(RELAY_PIN,1);
}
asm volatile (" jmp 0"); //reboot
}
gw.send(msg.set(state?false:true),true); // Send new state and request ack back
re="";
}
oldValue = value;
}

void incomingMessage(const MyMessage &message) {
state = message.getBool();
digitalWrite(RELAY_PIN, state?RELAY_ON:RELAY_OFF);
gw.saveState(CHILD_ID, state);
Serial.print("Incoming change for sensor:");
Serial.print(message.sensor);
Serial.print(", New status: ");
Serial.println(message.getBool());
re=String(message.sensor);
}

[funky81]

@C.r.a.z.y. Thanks for the code, very useful, coz I've found out is that i have to restart my pro mini every couple of days...

[C.r.a.z.y.]

@funky81 Hek can make better but he didnt understand as you see