Is the moisture sensor build doc accurate
-
I am attempting to set up a moisture sensor, using the diagram and included sketch (https://www.mysensors.org/build/moisture). The diagram shows pin 3 for data but the sketch references d6 and d7. I don't see any reference to pin 3 there. I am not clear why there are references to d6 and d7 when my sensor only has a single data pin.
-
I am attempting to set up a moisture sensor, using the diagram and included sketch (https://www.mysensors.org/build/moisture). The diagram shows pin 3 for data but the sketch references d6 and d7. I don't see any reference to pin 3 there. I am not clear why there are references to d6 and d7 when my sensor only has a single data pin.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login