3. only 1 device found while including sensor

only 1 device found while including sensor

  • krokus57

    Hi!

    Have a problem to include DallasTemperatureSensor to Vera

    Then I press Start at Vera web interface and reset sensor, only 1 device appears in vera.
    Only Arduino node.

    x00x00sensor started, id 0
    send: 0-0-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
    send: 0-0-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
    send: 0-0-0-0 s=255,c=3,t=11,pt=0,l=18,st=fail:Temperature Sensor
    send: 0-0-0-0 s=255,c=3,t=12,pt=0,l=3,st=fail:1.0
    send: 0-0-0-0 s=0,c=0,t=6,pt=0,l=5,st=fail:1.4.1
    send: 0-0-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:79.3

    Gateway:
    0;0;3;0;5;0
    0;0;3;0;2;Get Version
    0;0;3;0;2;1.4.1
    0;0;3;0;9;read: 0-0-0 s=255,c=0,t=17,pt=0,l=5:1.4.1
    0;255;0;0;17;1.4.1
    0;0;3;0;9;read: 0-0-0 s=255,c=3,t=6,pt=1,l=1:0
    0;0;3;0;9;read: 0-0-0 s=255,c=3,t=11,pt=0,l=18:Temperature Sensor
    0;0;3;0;9;read: 0-0-0 s=255,c=3,t=12,pt=0,l=3:1.0
    0;0;3;0;9;read: 0-0-0 s=0,c=0,t=6,pt=0,l=5:1.4.1
    0;0;0;0;6;1.4.1
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
    0;0;1;0;0;79.7
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.5
    0;0;1;0;0;79.5
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
    0;0;1;0;0;79.7
    0;0;3;0;9;read: 0-0-0 s=255,c=0,t=17,pt=0,l=5:1.4.1
    0;255;0;0;17;1.4.1
    0;0;3;0;9;read: 0-0-0 s=255,c=3,t=6,pt=1,l=1:0
    0;0;3;0;9;read: 0-0-0 s=255,c=3,t=11,pt=0,l=18:Temperature Sensor
    0;0;3;0;9;read: 0-0-0 s=255,c=3,t=12,pt=0,l=3:1.0
    0;0;3;0;9;read: 0-0-0 s=0,c=0,t=6,pt=0,l=5:1.4.1
    0;0;0;0;6;1.4.1
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
    0;0;1;0;0;79.7
    0;0;3;0;9;read: 0-0-0 s=255,c=0,t=17,pt=0,l=5:1.4.1
    0;255;0;0;17;1.4.1
    0;0;3;0;9;read: 0-0-0 s=255,c=3,t=6,pt=1,l=1:0
    0;0;3;0;9;read: 0-0-0 s=255,c=3,t=11,pt=0,l=18:Temperature Sensor
    0;0;3;0;9;read: 0-0-0 s=255,c=3,t=12,pt=0,l=3:1.0
    0;0;3;0;9;read: 0-0-0 s=0,c=0,t=6,pt=0,l=5:1.4.1
    0;0;0;0;6;1.4.1
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
    0;0;1;0;0;79.7
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.5
    0;0;1;0;0;79.5
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
    0;0;1;0;0;79.7
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.5
    0;0;1;0;0;79.5
    0;0;3;0;2;Get Version
    0;0;3;0;2;1.4.1
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
    0;0;1;0;0;79.7
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.5
    0;0;1;0;0;79.5
    0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
    0;0;1;0;0;79.7

    Sometimes after including I see one device temperature sensor without arduino node.

    And finally gw.getConfig().isMetric always == 0. But in web interface UNIT set to "M".

    Please help.

    Arduino 1.6.0
    LIbrary 1.4.1
    Vera lite UI5

    0
  • hek
    Admin

    decouple capacitor on gw and node?

    0
  • krokus57

    Gateway already has stabilised power source (with capacitors). Sensor powered by usb from macbook. Just added capacitors to sensor too.

    No changes.

    Strange with this:

    normal sensor start:
    send: 0-0-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
    send: 0-0-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
    send: 0-0-0-0 s=255,c=3,t=11,pt=0,l=18,st=ok:Temperature Sensor
    send: 0-0-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
    1 #number of DS
    send: 0-0-0-0 s=0,c=0,t=6,pt=0,l=5,st=ok:1.4.1
    send: 0-0-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:86.6
    0 #result of gw.getConfig().isMetric
    86.60 #temperature in F, but needed in C.

    Sensor start in inclusion mode:

    x00x00sensor started, id 0
    send: 0-0-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
    send: 0-0-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
    send: 0-0-0-0 s=255,c=3,t=11,pt=0,l=18,st=fail:Temperature Sensor
    send: 0-0-0-0 s=255,c=3,t=12,pt=0,l=3,st=fail:1.0
    1
    send: 0-0-0-0 s=0,c=0,t=6,pt=0,l=5,st=fail:1.4.1
    send: 0-0-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:80.1
    0
    80.10

    After pressing several times reset while including. I have 2 devices. Node and temperature. Bu temperature stil in F and Mysensor plugin doesn't react on changing Metric/Imperial settings. Vera doesn't show "Save" button.

    0
  • hek
    Admin

    My guess is that you should try tuning the gatewasy power supply / decoupling capacitor .. It does not look good. That would explain problems when sending out messages to your node (and the ack problem)

    0 krokus57 1 Reply
  • krokus57

    @hek thanks. will try with different power source.

    0
  • Dean

    What I always do is I keep the sensor connected to my macbook with the serial monitor running. I start the Gateway on the Vera dashboard and I reset the sensor. I watch the serial monitor to see what is "ok" and at the same time watch what the Gateway found in the way of devices.when it goes through the devices in the serial monitor and not all the devices have been found by the Gateway, I then reset the sensor again.

    I keep doing this until all the executed devices are found. This has been working for me 🙂

    0
  • Pseudomizer

    I have the exact same issue. No matter what I do this sketch only creates one device. Arduino_temp.PNG

    How did you solve that problem?

    0
Log in to reply
 

Suggested Topics

7
Online

11.4k
Users

11.1k
Topics

112.7k
Posts



Copyright 2019 Sensnology   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service