Radio compatibility question

[garfius]

First of all, thanks 4 the great work!

Now, have got a few:

sx1278(ai thinker RA-02)-433
sx1276-868
RFM95W <-- explicitly supported, yeah! like! :heart_eyes:
RFM98W

And i wonder wether this hardware is fully supported, and wether i can change the default frequencies (868 || 433) to other hardware supported frequencies (RA-02 suppports 410Mhz to 525Mhz). :ghost:

Thanks 4 the answers in advance. :hand_with_index_and_middle_fingers_crossed:

[skywatch]

@garfius According to this page.... https://www.mysensors.org/about/components#the-radio the only supported devices are listed as nrf24l01+, rfm69 and esp8266.

I guess if you are talented in programming you could add your own support for the items you listed and maybe share your success so that other can benefit too....

I can see no reason you cannot 'change the default frequencies' so long as the protocols stay intact and all nodes talking to the gw are on the same frequency.

[garfius]

@skywatch Correct!

But according to:

https://lowpowerlab.com/forum/rf-range-antennas-rfm69-library/rfm69-hoperf-are-they-semtech-clones-or-not/

And other sources, HopeRF RFM9X are chinese clones of the original semtech sx127X, and these things works using same LoRa.h library from sandeep. So, i guess are practically identical.

Also, i checked MySensors.h compiler definitions, where can be seen 868 and 433 freq are allowed.

So, these radios maybe works...¿!?¿! :face_with_rolling_eyes:

[nagelc]

I use the RA-01 with MySensors RFM95 drivers. Works just fine.
I have not tried to change the frequency though. I have only used 433Mhz.

[garfius]

@nagelc Thaaaanks!
Your answer is valuable to anyone.