help with radioland-china nrf52832 beacon
-
hi guys, i bought a couple of these beacons
- is it possible to reprogram them via a jlink?
2)can you tell me a jlink to buy that is not too expensive?
I would like to program these beacons with Mycropython or with Espruino.
3)It's possible?
- is it possible to reprogram them via a jlink?
-
Yes it is possible, using the SWDIO and SWDCLK pads.
I programmed one to operate with MySensors using a black magic probe, but the J-Link also supports SWD programming.
The tricky part is connecting to the pads. I just soldered on some wires -- not a very elegant solution, but it worked.You can get a reasonably priced J-Link EDU from Adafruit:
https://www.adafruit.com/product/3571
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login