Connection ESP32 and NRF24
-
Have bought a ESP32 Dev with 38 pins. Try to connect my NRF24, got a problem with CSN and CE, there is no standard pin. GPIO 5 for CSN is ok CE on GPIO17 is blocking u2TXD I need. Try with #define MY_RF24_CE_PIN 12 to get CE to GPIO 12 no luck. Somebody did the job before, and did succeed, how?
-
-
-
@electrik, yes I use gpio numbers. Sketch is very very long, I am porting it from esp8266 to esp32 wroom. Fixed different timers, from os_timer_t to hw_timer_t, less relevant, now the nrf24 switch. CE attached to gpio 17 the nrf24 Works fine, want to move to gpio 12, with the #define i mentioned, CE just stays at gpio 17
-
@electrik, yes I use gpio numbers. Sketch is very very long, I am porting it from esp8266 to esp32 wroom. Fixed different timers, from os_timer_t to hw_timer_t, less relevant, now the nrf24 switch. CE attached to gpio 17 the nrf24 Works fine, want to move to gpio 12, with the #define i mentioned, CE just stays at gpio 17
-
@mfalkvidd That did it, thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login