Problems with new GW

[Misna]

Hi!

I just migrated my Home Assistant from RPi to VMware vsphere virtual appliance. I didn't get the current Arduino Uno serial gateway to work via passing through the device in VMware (Zigbee stick works great this way).

So I did a ESP8266 gateway since I had a board available. I got it flashed and I think the ESP talks with radio and HA talks with the gateway but my nodes won't work. I tried to remove the .json file, no help (just removed the entities from HA).

All I get in serial monitor of the gateway is this (over and over):
gwt:rfc:c=0,msg=0;255;3;0;2;

What should I try next? All my nodes have statically assigned node ID's. I'm not 100% sure what the version of mysensors they have but I think it is 2.2.something

[skywatch]

@Misna The first thing I would od in your situation is to make sure that all gateways and nodes are on the latest version of mysensors and try again.

2.3.2 is the latest stable version I believe.

[Misna]

Thanks, at least one of the nodes started working!

Will try to update another one today.