Problems with new GW
-
Hi!
I just migrated my Home Assistant from RPi to VMware vsphere virtual appliance. I didn't get the current Arduino Uno serial gateway to work via passing through the device in VMware (Zigbee stick works great this way).
So I did a ESP8266 gateway since I had a board available. I got it flashed and I think the ESP talks with radio and HA talks with the gateway but my nodes won't work. I tried to remove the .json file, no help (just removed the entities from HA).
All I get in serial monitor of the gateway is this (over and over):
gwt:rfc:c=0,msg=0;255;3;0;2;What should I try next? All my nodes have statically assigned node ID's. I'm not 100% sure what the version of mysensors they have but I think it is 2.2.something
-
Hi!
I just migrated my Home Assistant from RPi to VMware vsphere virtual appliance. I didn't get the current Arduino Uno serial gateway to work via passing through the device in VMware (Zigbee stick works great this way).
So I did a ESP8266 gateway since I had a board available. I got it flashed and I think the ESP talks with radio and HA talks with the gateway but my nodes won't work. I tried to remove the .json file, no help (just removed the entities from HA).
All I get in serial monitor of the gateway is this (over and over):
gwt:rfc:c=0,msg=0;255;3;0;2;What should I try next? All my nodes have statically assigned node ID's. I'm not 100% sure what the version of mysensors they have but I think it is 2.2.something
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login