RF 433 MHz sensor to control RF sockets.

[lasso]

@hek
Wow it's working :+1:. Hek thank you very much, you are the master :D
This is working code:
#include <Relay.h>
#include <SPI.h>
#include <EEPROM.h>
#include <RF24.h>

    #include <RemoteReceiver.h>
    #include <RemoteTransmitter.h>
    
    #define TRANSMITTER_PIN 8
    #define RECEIVER_INTERRUPT 1
    #define RF433_CHILD_ID 0
    Sensor gw;
    
    volatile bool receivedNew = false;
    volatile unsigned long incomingRfCode;
    volatile unsigned int incomingRfPeriod;
    
    void setup()  
    {  
      gw.begin(28);
      gw.sendSketchInfo("RF433", "1.0");
      gw.sendSensorPresentation(RF433_CHILD_ID, S_IR);
       delay(200);
      RemoteReceiver::init(RECEIVER_INTERRUPT, 3, newRf);
    }
    
    void loop() 
    {
      if (gw.messageAvailable()) {
        message_s message = gw.getMessage(); 
        sendRfMessage(message);
      }
      if(receivedNew) {
        getRfMessage(incomingRfCode, incomingRfPeriod);
        receivedNew = false;
      }
    }
    
    void sendRfMessage(message_s message) {
      if (message.header.messageType==M_SET_VARIABLE &&
          message.header.type==V_IR_SEND) {
    
         char sendingRfCode[7]; 
         char sendingRfPeriod[4];
         strncpy(sendingRfCode, message.data, 6);
         strncpy(sendingRfPeriod, message.data+6, 3);
         sendingRfCode[6] = 0;
         sendingRfPeriod[3] = 0;
         Serial.println(atol(sendingRfCode));
         Serial.println(atol(sendingRfPeriod));
         RemoteReceiver::disable();
         interrupts();
         delay(200);
         RemoteTransmitter::sendCode(TRANSMITTER_PIN, atol(sendingRfCode), atol(sendingRfPeriod), 3);
         RemoteReceiver::enable();
       }
    }
    
    void newRf(unsigned long _incomingRfCode, unsigned int _incomingRfPeriod){
         incomingRfCode = _incomingRfCode;
         incomingRfPeriod = _incomingRfPeriod;
         receivedNew=true;
    }
    
    void getRfMessage(unsigned long incomingRfCode, unsigned int incomingRfPeriod){
      char gettingRfMessage[10];
      sprintf(gettingRfMessage, "%lu%u", incomingRfCode, incomingRfPeriod);
      Serial.println(incomingRfCode);
      Serial.println(incomingRfPeriod);
      Serial.println(gettingRfMessage);
      gw.sendVariable(RF433_CHILD_ID, V_IR_RECEIVE, gettingRfMessage);
    }

[donnib]

@lasso Are you learning the codes with the receiver inorder to know what to send to them ? I would really like to react on my 433mhz sensors i have for doors and i am interested how to do that and i found your post and i am trying to figure out if i could use some of this code for that purpose, what's your take on that ?

[dayve218]

any idea about this?

variable or field 'sendRfMessage' declared void

[dayve218]

@lasso @hek
any idea about this?

variable or field 'sendRfMessage' declared void

[Terence Faul]

Did you ever get this working?

What pins did you attache the transmitter to and what pin did you attach the receiver to?

Is that the latest code?

[gebir]

Hello,
this is my version "Home Easy Plug-in switch (HE877)". scatch.
Arduino emulates remote control Elro AB440
AVI, thanks for the inspiration.

https://codebender.cc/sketch:92208

[Straydog]

@lasso Like to try your RF 433 Mhz Sensor sketch but can't find a working instance od Relay.h.
Can you help?

[cdr]

"can't find a working instance od Relay.h."

Having the same issue here, perhaps it's for version 1.3 of mysensors?

[hek]

@cdr

Yes, 1.3 had a Realy-class.

[alowhum]

Does anyone have a working version of this for 2.x?