What could be the possible reasons for MySensors sensors not working with MyController on Raspberry Pi, and how can one troubleshoot and resolve the issue?

[Greg Bowers]

I have been struggling with a issue with MySensors sensors not working with MyController on Raspberry Pi. Your suggestions on troubleshooting and resolving the issue have been really helpful. I will definitely try them out and see if it resolves my problem.

[jkandasa]

@Greg-Bowers can you elaborate the issue you are facing with MyController? also please provide the MyController version details

[Greg Bowers]

Hello,

I'm having trouble getting my MySensors sensors to work with MyController on my Raspberry Pi. I'm using MyController version 2.0.0.Final and MySensors version 2.3.2.

I've followed the installation instructions for both MyController and MySensors, but when I try to connect my sensors to MyController, they are not showing up in the interface.

I've checked the logs and I'm not seeing any error messages, so I'm not sure what the issue could be.

Any help or suggestions would be greatly appreciated. Thanks!

[JeeLet]

Hello

what type of architecture do you use ?

(an example)
bus....... = Nodes <--- ? ---> Gateway <--- Usb ---> Controller
material = Atmega ..............arduinoUno.................Raspy4
software = MyS2.3.............MyS2.3 ....................Ubuntu/MyC2.x

?= RF RFM RS

[Greg Bowers]

Hello @JeeLet

The architecture I am using is as follows:
Nodes <--- RF ---> Gateway <--- RFM/RS ---> Controller
Material: Atmega-based sensors
Software: MySensors version 2.3.2
Controller: MyController version 2.0.0.Final
Platform: Raspberry Pi running Ubuntu with MyController 2.x

[JeeLet]

how to find a communication problem on a channel?
the solution is to check each link.

on the gateway : https://www.mysensors.org/build/advanced_gateway

add leds or a single one to visualize the dialog # Radio Traffic LEDs
(this function can also be used on a node )

on the gateway a dummy/virtual value can be created to simulate a probe (the result will tell us if the gateway is not at fault

[jkandasa]

@Greg-Bowers

MyController version 2.0.0.Final

There is no version in MyController 2.0.0.Final I think it should be 1.6.x or 2.0.0-devel?

[JeeLet]

So @Greg-Bowers .... you found the flaw?

hello @jkandasa
..... a little parenthesis!
( what's new in MyC :) )

https://github.com/mycontroller-org/server/releases/tag/development