Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Enclosure for Easy-Peasy-LEDsy nRF24 Serial Gateway

Enclosures / 3D Printing

1 Posts 1 Posters 20 Views 1 Watching

K
K
KevinT

wrote last edited by

#1

HI all,

I'm sharing a serial gateway I built, based on the Easy-Peasy Serial Gateway.
You can find the hardware on OpenHardware: Easy-Peasy-LEDsy MySensors NRF24 Serial Gateway. It is basically a D1 mini with a shield into which you connect an nRF24+PA+LNA module and the LEDs.

Here are the stl files:
GW_Case.stl
GW_Cover.stl
GW_Hold Down.stl

It has a snap on cover, ventilation, and a hold-down to fix the D1 mini.
1 Reply Last reply

2

Hello! It looks like you're interested in this conversation, but you don't have an account yet.

Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

With your input, this post could be even better 💗

11

Online

12.4k

Users

11.2k

Topics

113.5k

Posts