Fail Messages on Every MyS Sketch
-
Hey guys,
I went through two Arduino Uno today trying to figure out what is causing these fail messages below. It looks like any sketch I use on MY Sensor library , I'm getting this fail messages. What could be the problem?
sensor started, id 3
send: 3-3-1-0 s=255,c=0,t=17,pt=0,l=5,st=fail:1.4.1
send: 3-3-1-0 s=255,c=3,t=6,pt=1,l=1,st=fail:1
send: 3-3-1-0 s=255,c=3,t=11,pt=0,l=13,st=fail:Motion Sensor
send: 3-3-1-0 s=255,c=3,t=12,pt=0,l=3,st=fail:1.0
send: 3-3-1-0 s=1,c=0,t=1,pt=0,l=5,st=fail:1.4.1
0
send: 3-3-1-0 s=1,c=1,t=16,pt=0,l=1,st=fail:0
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login