Sensebender Micro
-
Hello,
Can some one measure the real power consumption of the sensebender with the default sketch (humidity, temperature, battery level) running and the nrf24l01 module?
Would like to get an idea of home many µA are used in active mode and how many µA in sleep mode the sensebender is taking.
-
Still waiting here on the East Coast...
-
My order arrived in the US midwest today (shipped from HK on June 3). I hooked one up to a CR123 to test and it worked right out of the box. I do not know much about battery operation and have a question about the battery monitoring - Do I need to alter the sketch for the CR123 vs the original 2 x AA? Or a 3V coincell?
-
Received mine yesterday.
-
I think that occasionally, domoticz only get the temperature, or the humidity in a single transmission, and then decides that it's another sensor type and therefore create a new instance for it.
Sensebender always sends both temperature and humidity readings together (in two different messages, as it's two different sensor child ids that is used).
-
How many would be interested in a Sensebender Micro LE (light edition), and how many units would you buy?
The Light edition would be without Si7021, and external flash.
I do not have any prices yet, as we need to have some expected sales figures to give to our partner. We need batch sizes of at least 100 units (preferably larger like 200) otherwise setup fees, etc. would eat away on the savings from removing the components.
-
How many would be interested in a Sensebender Micro LE (light edition), and how many units would you buy?
The Light edition would be without Si7021, and external flash.
I do not have any prices yet, as we need to have some expected sales figures to give to our partner. We need batch sizes of at least 100 units (preferably larger like 200) otherwise setup fees, etc. would eat away on the savings from removing the components.
-
How many would be interested in a Sensebender Micro LE (light edition), and how many units would you buy?
The Light edition would be without Si7021, and external flash.
I do not have any prices yet, as we need to have some expected sales figures to give to our partner. We need batch sizes of at least 100 units (preferably larger like 200) otherwise setup fees, etc. would eat away on the savings from removing the components.
-
@korttoma @ServiceXp
I haven't got any numbers from itead, but from the prices that I get from mouser, we could probably save around 4$ if we skip Si7021 and external flash.
This is still more than the cheap mini clones etc. but the problem here, is that we are running in low volume batches. The setup fees for each batch is rather high, and this has to be divided out on each board in the batch.
