Information about the data
-
Just getting started with MySensors. I have 3 Nano Nodes connected to a Uno gateway setup. In viewing the Serial Monitor, I'm trying to figure out what the numbers and letters being displayed mean. ex.
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=23,pt=2,l=2,sg=0:455
0;0;1;0;23;455This seems to be a very robust system as when I loaded up the sketch, the Nano was seen right away and was integrated into the Gateway. Is there a basic format that the information needs to be in when creating your own sensor to be integrated into this system and be seen by the Gateway?
Thank you for any information
John
-
Start by looking at the examples at http://www.mysensors.org/build
Then go and read the API docs at http://www.mysensors.org/download/sensor_api_15
Perhaps read up on the serial API as well
-
I looked through the areas you suggested but I didn't see any reference to the letters used in the following line of data or how the data is laid out.
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=23,pt=2,l=2,sg=0:455
0;0;1;0;23;455I did figure out that the last number at the end of the line was the data being sent.
Can I assume that you can't use the data directly from the gateway, It has to be connected into a VERA box?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login