VERA 2 Device Install
-
@wmylionel said:
Could try reducing the baud rate between gateway and vera. I had trouble communicating with the serial gateway at the highest speed (only 1 way communication), reducing to 9600 solved it.
yep, that might worth a try.
To update baud rate on gateway side, edit the following line in Sensor.h
#define BAUD_RATE 115200 -
@wmylionel said:
Could try reducing the baud rate between gateway and vera. I had trouble communicating with the serial gateway at the highest speed (only 1 way communication), reducing to 9600 solved it.
yep, that might worth a try.
To update baud rate on gateway side, edit the following line in Sensor.h
#define BAUD_RATE 115200 -
-
@hek
I set the L_Arduino.lua to 9600. The mysensor plugin now states to set the it 9600. I set it to 9600 and reload. It again states to set the serial port 9600 (but it is set to 9600), and the plugin fails. Is there something else I need to change?what value is your serial port configuration page showing now?
-
what value is your serial port configuration page showing now?
@BulldogLowell It shows 9600
-
Could try reducing the baud rate between gateway and vera. I had trouble communicating with the serial gateway at the highest speed (only 1 way communication), reducing to 9600 solved it.
@wmylionel: Are you using Vera 2? If so what lines do you have in the /etc/cmh/serproxy.port file?
Thanks
John
