💬 Easy/Newbie PCB for MySensors

[sundberg84]

@BastienVH - It looks right! If the manufacturing process works out the boards are going to be good!

[GertSanders]

I have uploaded my boards at DirtyPCB in ZIP archives with the GERBER files, so this certainly works. Nice to hear that they also accepted the Eagle .brd file. So far I thought only OSH Park accepted Eagle 7.3 files, so maybe I should just try and see what they make of it.
@BastienVH @sundberg84 : from the moment DitryPCB shows you a correct PCB image, you can be pretty sure the boards will turn out fine. But as with all lithographic processes, you always need to check the boards for imperfections if you use very dense layouts. In the case of this layout I see no reason to worry about that. And the red board colour is really cool :-)

[sundberg84]

I got reply from dirtypcbs.com and in their new page it was possible to upload and sell PCBs.
I have now uploaded it, and waiting for approval.

[BastienVH]

@GertSanders
I'll check when they arrive.
The red is really nice but was actually a mistake, I didn't check the board color setting because I was so excited to order this PCB! ;-)
You get a choice of red, yellow, green, blue, black or white. All without extra cost, which is nice.

[ar91]

@sundberg84, Thanks for the simple design.

Can this board be ordered from dirtypcbs.com? or should we wait until we hear from you?

[sundberg84]

I have uploaded it to dirtypcbs and waiting for approval.

[ar91]

@sundberg84 but i am able to see the board on the dirtypcb's page. Here is the link and it is allowing me to order it. But before i order it i wanted to make sure that there is nothing wrong with this board.

Thanks for your hardwork.

[sundberg84]

@ar91 This is not my upload, but it looks right.
Its not the latest Rev 7 but it Rev6 was working so I think its safe to order.

If you wait and order from my upload you are also contributing to MySensors as i will donate that small amount that goes to the author when buying.

[ar91]

@sundberg84 Sure will wait for your confirmation.

[scooter217]

Nice job. I will wait as well .

[BastienVH]

I just received my order from Dirtypcbs. The protopack I ordered had 11 boards, so that's nice.
They took 10 days to arrive in Belgium.
From first glance, it looks like they's work, but I'll have to test it this weekend to be sure.
Here's a picture.

[GertSanders]

@BastienVH izz naaiss !!!

[allmp13]

@sundberg84
I'm waiting your upload with impatience.

[sundberg84]

@allmp13 sorry, still no answer from dirtypbs - status: waiting for approval
If you are impatient you can always use the link above... or upload the gerber files.

[BastienVH]

I would share the link to my upload, but I don't want to get in the way of sundberg.
I think it's better for sundberg to share his link in the top post and donate whatever he makes to the mysensors project (like he said).
If you can't wait, I'll PM you the link and donate the $1 to mysensors, but it feels wrond to take money (even if I'm giving it away straight afterwards) for something I didn't create myself...

[allmp13]

@sundberg84, @BastienVH Thanks for your reply

[sundberg84]

For those who are feeling lucky: http://dirtypcbs.com/view.php?share=16244&accesskey=14b044f08e0126cb42a9dd9522c568e6
This is my revision 8 and should work just fine but is untested.

Still no reply from them about my Rev7 upload - and im not expecting it during the weekend so.

[dark-nico]

Nice job thank you!
This pcb is exactly what I needed to quickly assemble little sensors.
I was waiting for your v7 upload, but I'm feeling pretty lucky about v8.
What the mains differences beside making more room for the nrf24 ?

[sundberg84]

@dark-nico The nrf24 doesnt go outside the PCB so much, and therefore its smaller. But because of that i had to move the 5 to 3.3volt regulator. Nothing else should be different.

[dark-nico]

@sundberg84 Thanks for the quick reply.
I've ordered a protopack, I'll let you know when I receive/test it.