Ethernet Gateway 1.4 with Vera UI7



  • Hi,
    I am hiving some trouble getting the Ethernet 1.4 gateway going with Vera UI7. It seems to compile and install OK, but it doesn't function. Often pressing the "Start for inclusion button" on the Vera doesn't send any data (but sometimes it does), and after a short time following a reboot of the Vera, it sends the gateway all sorts of rubbish.

    I can telnet to the gateway port and what I type in shows in the serial debug nicely, and I can manually put the gateway into inclusion mode and I see the sensor data OK. Following is the serial debug (without the network traffic, and including a few extra debug statements)

    Hello
    0;0;3;0;14;Gateway startup complete.
    Gateway Started
    Hello, Ethernet Started
    Server Started
    0;0;3;0;9;Inclusion started by button.
    0;0;3;0;5;1
    0;0;3;0;9;Inclusion started by button.
    0;0;3;0;5;1
    0;255;0;0;17;1.4
    0;0;0;0;7;1.4
    0;1;0;0;6;1.4
    0;0;3;0;5;0
    eth0-Hello - This is some text from telnet
    

    It seems to start off ok, asking for the version, but then goes wrong. Following is a trace of the network traffic coming from the vera and going to the gateway:

    0;0;3;0;2;Get Version
    .......1.0..@.........0..E.......1.0..@.........0..E...FFooma...^......1....2.........2.........1.0..@.........00..E...Fooma...^......1....22........2.........1.0..@..........0..E...Fooma...^......0..@.........0..E...Fooma....^......1....2........2..........1.0..@.........0..E....Fooma...^......1....2.........2.........1.0..@..........0..E...Fooma...^......1.....2........2.........1.0..@..........0..E...Fooma...^.......1....2........2.........11.0..@.........0..E...Fooma....^......1....2........2..........1.0..@.........0..E....Fooma...^......1....2.........2.........1.0..@..........0..E...Fooma...^......1.....2........2.........1.0..@..........0..E...Fooma...^.......1....2........2..........1.0..@.........0..E...Foomaa...^......1....2........2..........1.0..@.........0..E....Fooma...^......1....2.........2.........1.0..@..........0..E...Fooma...^......1.....2........2.........1.0..@@.........0..E...Fooma...^.......1....2........2..........1.0..@.........0..E...Foomma...^......1....2........2..........1.0..@.........0..EE...Fooma...^......1....2.........2.........1.0..@..........0..E...Fooma...^......1.....2........2.........1.0...@.........0..E...Fooma...^.......1....2........2..........1.0..@.........0..E...Foooma...^......1....2........22.........1.0..@.........0...E...Fooma...^......1....2.........2.........1.0..@..........0
    ================================= CUT CUT CUT =========================
    ...~....dM-SEEARCH * HTTP/1.1
    ..@.@..C..........0..@j...E..1..@.@......
    f..
    ...~.....M-SEARCH *  HTTP/1.1
    ...3.t.@............Bp....E..(!.@.?..a..........6..........P...r
    .........=.....@...........Bp....E...(!.@.?..`.........6..........!P...q.........N%p^..@............Bp....E..(!.@.?.._..........6.........=P...q.............fF.@...........Bp.....E..(!.@.?..^.........6.....803006 3 ipp://192.168.10..102:631/printers/Brother_HLL-2140_series "Office" "Brotther HL-2140 series" "Brotheer HL-1240 Foomatic/hl1250 ((recommended)" job-sheets=noone,none lease-duration=300
    
    
    '..4.@...........Bp....E...(!.@.?..H.........6...........P...oN.........7AKz.@............Bp....E..(!/@.?..G..........6..........P...o2..........mZ}..@...........Bp.....E..(!0@.?..F.........6...


  • @jtm312
    I suggest you do as I am and go back to UI5.



  • Thanks, I changed over to using a wiznet5100 based board (iboard) and it seems to have fixed the problem.


Log in to reply
 

Looks like your connection to MySensors Forum was lost, please wait while we try to reconnect.