Door Sensor / Mini Pro Clone Interrupt

[Takero]

Hello,

i have some Trouble with my Door Sensor.
The Sensor works fine, but if i use the gw.sleep function they don't wake up. I try D2 and D3. Nothing happens. . . .

Herre is my Sketch:

#include <SPI.h>
#include <MySensor.h>
#include <Bounce2.h>


#define CHILD_ID 1
#define CHILD_ID_BATT 3
#define SENSOR_ID 30
#define BUTTON_PIN 3
#define INTERRUPT 1

int BATTERY_SENSE_PIN = A0;  // select the input pin for the battery sense point

#define SLEEP_TIME 600000

MySensor gw;

Bounce debouncer = Bounce(); 
int oldValue=-1;
 
int batterie_check = 0;
float normaldeltabatt = 0.400;
float batteriezwischen = 0;
int interrupt = 1;

MyMessage msg(CHILD_ID,V_TRIPPED);
MyMessage msgVolt(CHILD_ID_BATT, V_VOLTAGE);

void setup() {
  
  // use the 1.1 V internal reference
  analogReference(INTERNAL);
  gw.begin(NULL, SENSOR_ID);
  pinMode(BUTTON_PIN,INPUT);
  gw.sendSketchInfo("WoZi_Window", "1.0");
  digitalWrite(BUTTON_PIN,HIGH);
  debouncer.attach(BUTTON_PIN);
  debouncer.interval(5);
  gw.present(CHILD_ID, S_DOOR);  
  
}

void loop() {
  
  debouncer.update();
  // Get the update value
  int value = debouncer.read();
   
  if (value != oldValue) {
     // Send in the new value
     gw.send(msg.set(value==HIGH ? 1 : 0));
     oldValue = value;
  }

  
//  if (batterie_check >= 30 || batterie_check < 1) { 
//    // get the battery Voltage
//    int sensorValue = analogRead(BATTERY_SENSE_PIN);
//    float batteryValue = sensorValue * 0.0033140756302521;
//    //int batteryPcnt = sensorValue / 10;
//    batteriezwischen = batteryValue - 2;
//    //Serial.println(batteriezwischen);
//    float batteryPcnt = (batteriezwischen/normaldeltabatt) * 100;
//
//    Serial.print("Batt: ");
//    Serial.print(batteryValue);
//    Serial.println(" V");
//    gw.send(msgVolt.set(batteryValue, 1));
//    Serial.print("Battery Prozent: ");
//    Serial.print(batteryPcnt);
//    Serial.println(" %");
//    gw.sendBatteryLevel(batteryPcnt);
//    batterie_check = 1;
//  } else {
//    batterie_check++;  
//  }
 
gw.sleep(INTERRUPT, CHANGE, SLEEP_TIME);

}

[TheoL]

could you post a schematic you use for the provided sketch? It's a bit hard to tell what's wrong, just by looking at your sketch.

[mfalkvidd]

This will not affect the functionality of your sketch, but I suggest you change

gw.sleep(INTERRUPT, CHANGE, SLEEP_TIME);

to

gw.sleep(digitalPinToInterrupt(BUTTON_PIN) , CHANGE, SLEEP_TIME);

and remove

#define INTERRUPT 1

to avoid mistakes if you change BUTTON_PIN but forget to change INTERRUPT.

[Takero]

Thanks for help. . . i dont now why but it works now.

I Think i had an Hardware issues

Thanks!