Only ethernet nodes?
-
Hi,
I really want to use MySensors in my home automation project, but main idea of the system is to not be wireless. I have new house and I can have cables where I want. I just want to have more reliable system. The idea is one cat. 5/6 cable to each room where will be Arduino and from Arduino cat. 5 cable to sensors/relays. What is more - few kilometers from the house I have my office. The house and office are connected with fiber. I'd like to have some sensors there - if it is over IP then it is possible to connect it. I will have the rPi with Domoticz as controller but in my project the element which is unnecessary is the gateway. So normal connection is:
Sensor <-> Node <--wireless--> Gateway <--wired--> ControllerAnd I'd like to have something like this:
Sensor <-> Node <--wired--> Controller
Is it possible to connect the system this way? -
You can connect sensors directly to the Gateway and you can connect several Gateways to your Controller ( You need to check if Domoticz can handle this ).
So what you will have is several of these:
Sensor <-> GatewayNode <--wired--> Controller -
Hi,
I really want to use MySensors in my home automation project, but main idea of the system is to not be wireless. I have new house and I can have cables where I want. I just want to have more reliable system. The idea is one cat. 5/6 cable to each room where will be Arduino and from Arduino cat. 5 cable to sensors/relays. What is more - few kilometers from the house I have my office. The house and office are connected with fiber. I'd like to have some sensors there - if it is over IP then it is possible to connect it. I will have the rPi with Domoticz as controller but in my project the element which is unnecessary is the gateway. So normal connection is:
Sensor <-> Node <--wireless--> Gateway <--wired--> ControllerAnd I'd like to have something like this:
Sensor <-> Node <--wired--> Controller
Is it possible to connect the system this way?@Artur-Tomaszczyk You could use the RS (wired) version of MySensors
-
Ok, thanks. I'll try to find sketch for it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login