Any success using the very small form factor clones?
-
There's a bunch of extra small clones out there, some orientated towards clothing (such as the lilypad) but with interesting form factors (and shields for batteries etc.).
Has anyone had any luck creating sensors using these devices? I like the idea of the round ones for example as they would allow me to produce a sensor almost like a small sphere (Thinking of the Fibaro sensor form factor...).
Is there anything that would be considered a minimal spec to run a sensor? i.e. certain interrupts, io numbers etc.? which would be tested against these odd machines?
Cheers
Atomic.
-
Minimum? Well, you need the 3 fixed SPI pins and 2 more (CSN and CE) to run the radio (at least in the normal manner). And whatever pins you need for sensors and actuators.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login