RelayWithButtonActuator
-
I try to use Relay With Button Actuator 1.4 but I have problem. When i press button everything working well. Problem is when I restart node and want to change status form gateway, it doesn't work then. When i press button only once then i can remote from getaway.
My code:#include <MySensor.h> #include <SPI.h> #include <Bounce2.h> #define RELAY_PIN_2 8 #define RELAY_PIN 7 // Arduino Digital I/O pin number for relay #define BUTTON_PIN_2 4 #define BUTTON_PIN 3 // Arduino Digital I/O pin number for button #define CHILD_ID_2 2 #define CHILD_ID 1 // Id of the sensor child #define RELAY_ON 1 #define RELAY_OFF 0 Bounce debouncer = Bounce(); int oldValue=0; bool state; Bounce debouncer2 = Bounce(); int oldValue2=0; bool state2; MySensor gw; MyMessage msg(CHILD_ID,V_LIGHT); MyMessage msg2(CHILD_ID_2,V_LIGHT); void setup() { gw.begin(incomingMessage, AUTO, true); // Send the sketch version information to the gateway and Controller gw.sendSketchInfo("Double Relay & Button", "0.1"); // Setup the button pinMode(BUTTON_PIN,INPUT); // Activate internal pull-up digitalWrite(BUTTON_PIN,HIGH); // Setup the button pinMode(BUTTON_PIN_2,INPUT); // Activate internal pull-up digitalWrite(BUTTON_PIN_2,HIGH); // After setting up the button, setup debouncer debouncer.attach(BUTTON_PIN); debouncer.interval(5); debouncer2.attach(BUTTON_PIN_2); debouncer2.interval(5); // Register all sensors to gw (they will be created as child devices) gw.present(CHILD_ID, S_LIGHT); gw.present(CHILD_ID_2, S_LIGHT); // Make sure relays are off when starting up digitalWrite(RELAY_PIN, RELAY_OFF); // Then set relay pins in output mode pinMode(RELAY_PIN, OUTPUT); digitalWrite(RELAY_PIN_2, RELAY_OFF); // Then set relay pins in output mode pinMode(RELAY_PIN_2, OUTPUT); // Set relay to last known state (using eeprom storage) state = gw.loadState(CHILD_ID); digitalWrite(RELAY_PIN, state?RELAY_ON:RELAY_OFF); state2 = gw.loadState(CHILD_ID_2); digitalWrite(RELAY_PIN_2, state2?RELAY_ON:RELAY_OFF); } /* * Example on how to asynchronously check for new messages from gw */ void loop() { gw.process(); debouncer.update(); debouncer2.update(); // Get the update value int value = debouncer.read(); int value2 = debouncer2.read(); if (value != oldValue && value==0) { gw.send(msg.set(state?false:true), true); // Send new state and request ack back } oldValue = value; if (value2 != oldValue2 && value2==0) { gw.send(msg2.set(state2?false:true), true); // Send new state and request ack back } oldValue2 = value2; } void incomingMessage(const MyMessage &message) { // We only expect one type of message from controller. But we better check anyway. /* if (message.isAck()) { Serial.println("This is an ack from gateway"); } */ if (message.type == V_LIGHT && message.sensor == 1 && strlen(msg.getString()) != 0) { // Change relay state state = message.getBool(); digitalWrite(RELAY_PIN, state?RELAY_ON:RELAY_OFF); // Store state in eeprom gw.saveState(CHILD_ID, state); } else if(message.type == V_LIGHT && message.sensor == 2 && strlen(msg.getString()) != 0){ state2 = message.getBool(); digitalWrite(RELAY_PIN_2, state2?RELAY_ON:RELAY_OFF); // Store state in eeprom gw.saveState(CHILD_ID_2, state2); // Write some debug info Serial.print("Incoming change for sensor:"); Serial.print(message.sensor); Serial.print(", New status: "); Serial.println(message.getBool()); } }
-
I prepare sketch with 2 x button and 2 x relays and 8 x dallas. Could some one look at if it right, because i have problem remote relays after restart node. I don't know it is problem witch sketch or server software.
Log from gataway:
12-10-2014 18:57:55: 0;0;3;0;9;send: 0-0-2-2 s=11,c=1,t=2,pt=0,l=1,st=ok:0
12-10-2014 18:57:55: 0;0;3;0;9;send: 0-0-2-2 s=11,c=1,t=2,pt=0,l=1,st=ok:1
12-10-2014 18:57:54: 0;0;3;0;9;send: 0-0-2-2 s=12,c=1,t=2,pt=0,l=1,st=ok:0
12-10-2014 18:57:54: 0;0;3;0;9;send: 0-0-2-2 s=12,c=1,t=2,pt=0,l=1,st=ok:1
12-10-2014 18:57:53: 0;0;3;0;9;send: 0-0-2-2 s=11,c=1,t=2,pt=0,l=1,st=ok:0
12-10-2014 18:57:52: 0;0;3;0;9;send: 0-0-2-2 s=11,c=1,t=2,pt=0,l=1,st=ok:1
12-10-2014 18:54:39: 0;0;3;0;9;read: 2-2-0 s=0,c=1,t=0,pt=7,l=5:22.6
12-10-2014 18:54:26: 0;0;3;0;9;send: 0-0-203-2 s=11,c=1,t=2,pt=0,l=1,st=fail:0
12-10-2014 18:54:26: 0;0;3;0;9;send: 0-0-203-2 s=12,c=1,t=2,pt=0,l=1,st=fail:0
12-10-2014 18:54:26: 0;0;3;0;9;send: 0-0-203-2 s=12,c=1,t=2,pt=0,l=1,st=fail:1
12-10-2014 18:54:25: 0;0;3;0;9;send: 0-0-203-2 s=11,c=1,t=2,pt=0,l=1,st=fail:1Code:
#include <MySensor.h> #include <SPI.h> #include <Bounce2.h> #include <DallasTemperature.h> #include <OneWire.h> #define RELAY_PIN_2 8 #define RELAY_PIN 7 // Arduino Digital I/O pin number for relay #define BUTTON_PIN_2 4 #define BUTTON_PIN 3 // Arduino Digital I/O pin number for button #define CHILD_ID_2 12 #define CHILD_ID 11 // Id of the sensor child #define RELAY_ON 1 #define RELAY_OFF 0 Bounce debouncer = Bounce(); int oldValue=0; bool state; Bounce debouncer2 = Bounce(); int oldValue2=0; bool state2; //temp #define ONE_WIRE_BUS 5 // Pin where dallase sensor is connected #define MAX_ATTACHED_DS18B20 8 unsigned long SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds) unsigned long SEND_FREQUENCY = 30000; // Minimum time between send (in milliseconds). We don't wnat to spam the gateway. unsigned long lastSend; unsigned long sendTime; OneWire oneWire(ONE_WIRE_BUS); DallasTemperature sensors(&oneWire); MySensor gw; //temp float lastTemperature[MAX_ATTACHED_DS18B20]; int numSensors=0; boolean receivedConfig = false; boolean metric = true; MyMessage msg(CHILD_ID,V_LIGHT); MyMessage msg2(CHILD_ID_2,V_LIGHT); MyMessage msg3(0,V_TEMP); void setup() { // Startup OneWire sensors.begin(); gw.begin(incomingMessage, AUTO, true); // Send the sketch version information to the gateway and Controller gw.sendSketchInfo("Double Relay & Button, Temp", "0.1"); // Fetch the number of attached temperature sensors numSensors = sensors.getDeviceCount(); // Present all sensors to controller for (int i=0; i<numSensors && i<MAX_ATTACHED_DS18B20; i++) { gw.present(i, S_TEMP); } // Setup the button pinMode(BUTTON_PIN,INPUT); // Activate internal pull-up digitalWrite(BUTTON_PIN,HIGH); // Setup the button pinMode(BUTTON_PIN_2,INPUT); // Activate internal pull-up digitalWrite(BUTTON_PIN_2,HIGH); // After setting up the button, setup debouncer debouncer.attach(BUTTON_PIN); debouncer.interval(5); debouncer2.attach(BUTTON_PIN_2); debouncer2.interval(5); // Register all sensors to gw (they will be created as child devices) gw.present(CHILD_ID, S_LIGHT); gw.present(CHILD_ID_2, S_LIGHT); // Make sure relays are off when starting up digitalWrite(RELAY_PIN, RELAY_OFF); // Then set relay pins in output mode pinMode(RELAY_PIN, OUTPUT); digitalWrite(RELAY_PIN_2, RELAY_OFF); // Then set relay pins in output mode pinMode(RELAY_PIN_2, OUTPUT); // Set relay to last known state (using eeprom storage) state = gw.loadState(CHILD_ID); digitalWrite(RELAY_PIN, state?RELAY_ON:RELAY_OFF); state2 = gw.loadState(CHILD_ID_2); digitalWrite(RELAY_PIN_2, state2?RELAY_ON:RELAY_OFF); } /* * Example on how to asynchronously check for new messages from gw */ void loop() { gw.process(); debouncer.update(); debouncer2.update(); // Get the update value int value = debouncer.read(); int value2 = debouncer2.read(); if (value != oldValue && value==0) { gw.send(msg.set(state?false:true), true); // Send new state and request ack back } oldValue = value; if (value2 != oldValue2 && value2==0) { gw.send(msg2.set(state2?false:true), true); // Send new state and request ack back } oldValue2 = value2; unsigned long now = millis(); // Only send values at a maximum frequency or woken up from sleep if ((now - lastSend) > SEND_FREQUENCY) { Serial.print("dziala wysylanie temp"); // Fetch temperatures from Dallas sensors sensors.requestTemperatures(); // Read temperatures and send them to controller for (int i=0; i<numSensors && i<MAX_ATTACHED_DS18B20; i++) { // Fetch and round temperature to one decimal float temperature = static_cast<float>(static_cast<int>((gw.getConfig().isMetric?sensors.getTempCByIndex(i):sensors.getTempFByIndex(i)) * 10.)) / 10.; // Only send data if temperature has changed and no error if (lastTemperature[i] != temperature && temperature != -127.00) { // Send in the new temperature gw.send(msg3.setSensor(i).set(temperature,1)); lastTemperature[i]=temperature; } } lastSend=now; } } void incomingMessage(const MyMessage &message) { // We only expect one type of message from controller. But we better check anyway. /* if (message.isAck()) { Serial.println("This is an ack from gateway"); } */ if (message.type == V_LIGHT && message.sensor == 11) { // Change relay state state = message.getBool(); digitalWrite(RELAY_PIN, state?RELAY_ON:RELAY_OFF); // Store state in eeprom gw.saveState(CHILD_ID, state); } else if(message.type == V_LIGHT && message.sensor == 12){ state2 = message.getBool(); digitalWrite(RELAY_PIN_2, state2?RELAY_ON:RELAY_OFF); // Store state in eeprom gw.saveState(CHILD_ID_2, state2); // Write some debug info Serial.print("Incoming change for sensor:"); Serial.print(message.sensor); Serial.print(", New status: "); Serial.println(message.getBool()); } }
-
I have the same problem even with the one button . I can't control the light from Vera unless I have push the button after the restart . Also I noticed when i use the button to switch the light on and off from the button in Vera i can't see the status being updated . Any one experiencing the same problem ?
-
it is hard to read your code.
edit it putting it between three back ticks (```)
usually to the left of the 1 key on a USA keyboard
-
I second that. I have exactly the same issue. I have to physically toggle the switch before operating it from OpenHab.
-
Hello All,
i got the same problem, node can send information to gateway but can't receive command from controller.
do you know how to test communication between Gateway and Nodes?
I used Serial Gateway, i connected to gateway COM port and send command like 10;2;1;0;1;1;1\n to turn on relay but my node can't turn relay on.
When i press the button from NODE, it sent the update status to gateway,
-
Gateway not see ACK flag. Please fix this bag
Lib version 1.5, Node & gate = 1.5RelayButton log
send: 42-42-0-0 s=1,c=1,t=2,pt=2,l=2,sg=0,st=fail:0 Button value:0 Button value:1 send: 42-42-0-0 s=1,c=1,t=2,pt=2,l=2,sg=0,st=fail:1 Button value:0 Button value:1 send: 42-42-0-0 s=1,c=1,t=2,pt=2,l=2,sg=0,st=fail:0 Button value:0 Button value:1 send: 42-42-0-0 s=1,c=1,t=2,pt=2,l=2,sg=0,st=fail:1 Button value:0 Button value:1 send: 42-42-0-0 s=1,c=1,t=2,pt=2,l=2,sg=0,st=fail:0 Button value:0 Button value:1 send: 42-42-0-0 s=1,c=1,t=2,pt=2,l=2,sg=0,st=fail:1Gateway log
2015-08-04 18:52:07 Set: Node:42; Sensor:1; Type:1; Ack:0; Sub:2; Msg:0 2015-08-04 18:52:07 Set: Node:42; Sensor:1; Type:1; Ack:0; Sub:2; Msg:1 2015-08-04 18:52:07 Set: Node:42; Sensor:1; Type:1; Ack:0; Sub:2; Msg:0 2015-08-04 18:52:07 Set: Node:42; Sensor:1; Type:1; Ack:0; Sub:2; Msg:1 2015-08-04 18:52:08 Set: Node:42; Sensor:1; Type:1; Ack:0; Sub:2; Msg:0 2015-08-04 18:52:08 Set: Node:42; Sensor:1; Type:1; Ack:0; Sub:2; Msg:1 2015-08-04 18:52:08 Set: Node:42; Sensor:1; Type:1; Ack:0; Sub:2; Msg:0
-
That's not a gateway log...
-
Sory. Bad NRF transmitter
