💬 RFID Lock Sensor

zuolan

Hi Hek,
Thanks for sharing. It looks like a useful addition to my openhab system.
Can you tell me if it is possible to WRITE to the cards and tags? Some of them are being sold as 'white' cards. I am worried I have to program the tags myself.

hek

Yes, but you would need a re-writable tag. Here's an example:

http://www.allaboutcircuits.com/projects/read-and-write-on-nfc-tags-with-an-arduino/

zuolan

@hek
Thanks for quick reply. Is your example Mifare One S51 readonly?

zuolan

This post is deleted!

Michel - It

Hi, I have a MFRC522 module, and I would like to implement it with 2.0 library. could I use this code?

miro

I think this needs an update... The declaration is not complete for all users I think!

mfalkvidd

@miro could you describe the problem you are experiencing and what you expected to happen?

miro

@mfalkvidd

I have followed the guide here (https://www.mysensors.org/build/rfid) to the letter. Yes, it could be me that have problems but this isn´t so hard project. Feels like something is missing?

In the description it says:

"To find out the unique ID of your tag just run the example while looking at serial monitor. Hold tag in front of reader and your identifier should pop up."

This I did, but the monitor don`t show anything, just this

Starting sensor (RNNNA-, 2.0.0)
TSM:INIT
TSM:RADIO:OK
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:FAIL
!TSM:FAILURE
TSM:PDT

... And yes, I have switched the little pin to I2C on my PN532 RFID reader.

mfalkvidd

@miro the node is unable to connect to your gateway. What type of gateway are you using? Could you post the debug log from the gateway?

miro

@mfalkvidd I`m using nano as serial GW. I didn´t have any trouble with GW for a long time now.

0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
0;255;3;0;14;Gateway startup complete.
0;255;0;0;18;2.0.0
0;255;3;0;9;No registration required
0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1

Should I install some XML in my vera edge to get this sensor to work?
If I read the guide for this I will take it as GW has nothing to do with RFID until I have set the key code for the tags in the scetch and after that I implement the sensor to my vera?

miro

It was just that easy as a broken radio. Thank you for your help to get me think in other ways :)

mfalkvidd

Great work @miro, thanks for reporting back.

miro

Has anyone got this http://www.ebay.com/itm/271316626820?rmvSB=true to work with NFC and Android phone?

ben999

Hi all,
I can not get status of my doorlock node... begging for help! ;)
Got myself bits and pieces as per "build" page :

arduino micro
NRF24
PN532
relay
Raspberry SGtw works fine with another node (temp, motion and hum)
RFID node "speaks" with Raspberry as follows (IDE serial monitor) :

Starting sensor (RNNNA-, 2.0.0)
TSM:INIT
TSM:RADIO:OK
TSP:ASSIGNID:OK (ID=10)
TSM:FPAR
TSP:MSG:SEND 10-10-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 10-10-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSP:MSG:READ 0-0-10 s=255,c=3,t=8,pt=1,l=1,sg=0:0
TSP:MSG:FPAR RES (ID=0, dist=0)
TSP:MSG:PAR OK (ID=0, dist=1)
TSM:FPAR:OK
TSM:ID
TSM:CHKID:OK (ID=10)
TSM:UPL
TSP:PING:SEND (dest=0)
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=ok:1
TSP:MSG:READ 0-0-10 s=255,c=3,t=25,pt=1,l=1,sg=0:1
TSP:MSG:PONG RECV (hops=1)
TSP:CHKUPL:OK
TSM:UPL:OK
TSM:READY
Found NFC chip PN532
Firmware ver. 1.6
close lock
NODE:!REG
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=ok:0100
TSP:MSG:SEND 10-10-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=ok:2.0.0
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=ok:0
TSP:MSG:READ 0-0-10 s=255,c=3,t=15,pt=6,l=2,sg=0:0100
TSP:MSG:READ 0-0-10 s=255,c=3,t=6,pt=0,l=1,sg=0:M
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=11,pt=0,l=9,sg=0,ft=0,st=ok:RFID Lock
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=ok:1.0
TSP:MSG:SEND 10-10-0-0 s=1,c=0,t=19,pt=0,l=0,sg=0,ft=0,st=ok:
Request registration...
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=ok:2
TSP:MSG:READ 0-0-10 s=255,c=3,t=27,pt=1,l=1,sg=0:1
Node registration=1
Init complete, id=10, parent=0, distance=1, registration=1
Found tag id: 0x35,0xA8,0xF5,0xAA,0x00,0x00,0x00
open lock
TSP:MSG:SEND 10-10-0-0 s=1,c=1,t=36,pt=1,l=1,sg=0,ft=0,st=ok:1

That's my things file :


Bridge mysensors:bridge-eth:gateway [ ipAddress="127.0.0.1", tcpPort=5003, sendDelay=200 ] {
        lock            hallRfid01              [ nodeId="10", childId="1" ]    }

And my items file :

Contact         hallRfid01      "Front door lock"                 <frontdoor>             (gHall)                                 { channel="mysensors:lock:gateway:hallRfid01:lock" }

This is the openhab "mysensors log tail" when powering node on (presenting to gateway)

06:48:57.990 [DEBUG] [al.protocol.ip.MySensorsIpConnection] - Bridge is connected, connection skipped
06:49:05.585 [DEBUG] [rs.internal.protocol.MySensorsReader] - 10;255;0;0;17;2.0.0
06:49:05.597 [ERROR] [rs.internal.protocol.MySensorsReader] - (java.lang.IllegalStateException: Could not update state, because callback is missing) on reading from serial port, message: class org.openhab.binding.mysensors.internal.protocol.ip.MySensorIpReader
06:49:05.600 [DEBUG] [rs.internal.protocol.MySensorsReader] - 10;255;3;0;6;0
06:49:05.603 [DEBUG] [al.protocol.ip.MySensorsIpConnection] - I_CONFIG request received from M, answering: (is imperial?)false
06:49:05.606 [DEBUG] [rs.internal.protocol.MySensorsWriter] - Sending to MySensors: 10;255;3;0;6;M
06:49:05.609 [ERROR] [rs.internal.protocol.MySensorsReader] - (java.lang.IllegalStateException: Could not update state, because callback is missing) on reading from serial port, message: class org.openhab.binding.mysensors.internal.protocol.ip.MySensorIpReader
06:49:05.632 [DEBUG] [rs.internal.protocol.MySensorsReader] - 10;255;3;0;11;RFID Lock
06:49:05.636 [ERROR] [rs.internal.protocol.MySensorsReader] - (java.lang.IllegalStateException: Could not update state, because callback is missing) on reading from serial port, message: class org.openhab.binding.mysensors.internal.protocol.ip.MySensorIpReader
06:49:05.679 [DEBUG] [rs.internal.protocol.MySensorsReader] - 10;255;3;0;12;1.0
06:49:05.683 [ERROR] [rs.internal.protocol.MySensorsReader] - (java.lang.IllegalStateException: Could not update state, because callback is missing) on reading from serial port, message: class org.openhab.binding.mysensors.internal.protocol.ip.MySensorIpReader
06:49:05.684 [DEBUG] [rs.internal.protocol.MySensorsReader] - 10;1;0;0;19;
06:49:05.696 [DEBUG] [ternal.handler.MySensorsThingHandler] - Setting last update for node 10 to 2016-12-19T06:49:05.687+0000
06:49:05.712 [INFO ] [marthome.event.ItemStateChangedEvent] - mysensors_lock_gateway_hallRfid01_lastupdate changed from 2016-12-18T21:14:31.444+0000 to 2016-12-19T06:49:05.687+0000
06:49:07.991 [DEBUG] [al.protocol.ip.MySensorsIpConnection] - Bridge is connected, connection skipped
06:49:17.992 [DEBUG] [al.protocol.ip.MySensorsIpConnection] - Bridge is connected, connection skipped

And last when RFID tag is presented to reader

06:49:47.996 [DEBUG] [al.protocol.ip.MySensorsIpConnection] - Bridge is connected, connection skipped
06:49:49.305 [DEBUG] [rs.internal.protocol.MySensorsReader] - 10;1;1;0;36;1
06:49:49.310 [ERROR] [rs.internal.protocol.MySensorsReader] - (java.lang.IllegalStateException: Could not update state, because callback is missing) on reading from serial port, message: class org.openhab.binding.mysensors.internal.protocol.ip.MySensorIpReader
06:49:57.998 [DEBUG] [al.protocol.ip.MySensorsIpConnection] - Bridge is connected, connection skipped
06:49:58.567 [DEBUG] [rs.internal.protocol.MySensorsReader] - 10;1;1;0;36;0
06:49:58.572 [ERROR] [rs.internal.protocol.MySensorsReader] - (java.lang.IllegalStateException: Could not update state, because callback is missing) on reading from serial port, message: class org.openhab.binding.mysensors.internal.protocol.ip.MySensorIpReader
06:50:07.999 [DEBUG] [al.protocol.ip.MySensorsIpConnection] - Bridge is connected, connection skipped

On the bright side, the relay attached to arduino opens and closes as i present RFID tag in front of reader... :)

Unfortunately i don't get the lock status (locked or unlocked) in PaperUI nor openHab for iOS...
I don't get "open" or "closed" status as i do with motion sensor. I also don't get any change to the door icon (door_closed and door_opened)

Thanks a lot for your help :)

Best Regards,

Ben

samburner3

@miro said in 💬 RFID Lock Sensor:

@mfalkvidd

I have followed the guide here (https://www.mysensors.org/build/rfid) to the letter. Yes, it could be me that have problems but this isn´t so hard project. Feels like something is missing?

In the description it says:

"To find out the unique ID of your tag just run the example while looking at serial monitor. Hold tag in front of reader and your identifier should pop up."

This I did, but the monitor don`t show anything, just this
Starting sensor (RNNNA-, 2.0.0)
TSM:INIT
TSM:RADIO:OK
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:FAIL
!TSM:FAILURE
TSM:PDT
... And yes, I have switched the little pin to I2C on my PN532 RFID reader.

@mfalkvidd said:

@miro the node is unable to connect to your gateway. What type of gateway are you using? Could you post the debug log from the gateway?

I had the same question as @miro however my node is communicating and connected to the gateway correctly.
I only see the mysensors radio debug info on the serial monitor, and no application serial prints eg (Serial.print("Couldn't find PN53x board");) doesn't show up in the serial monitor at all.
Neither does "Found NFC chip" or anything else in the main code...
My radio is working and as I said no errors in the radio debug.
Is the main application even running?
I cannot get it to scan a card at all.

However if I comment out the <MySensors.h> library along with its dependencies in the main program, it works and I can scan cards, and get the Uid from them...

Any clues?
Thanks.

ostgardh

Hi.

Started using mysensors with RFID readers.
I have a suggestion by I am bad code programmer.

Is better to save the RFID tag key in the EPROM approved.
And If you want to add a key/tag with special tag which add new or remove tag.

What do you think?

cadet

Hi can you modify scetch for spi interface??

DirkB19

PN532.h: No such file or directory
Is driving me crazy ... I have Downloaded the zip file and extracted the 4 folders(PN532, PN532_SPI, PN532_I2C and PN532_HSU) into Arduino's libraries.
Same error.
I've tried adding the library as .zip : it says not a valid library file
what could be the problem ?

DirkB19

@DirkB19
Nevermind, I placed the PN532 related folders into the C:\Program Files (x86)\Arduino\libraries folder and now it works.
Before, I placed them into the \libraries folder where all my sketches are which does not work for this libary .

Aron Sjöberg

@Michel---It said in 💬 RFID Lock Sensor:

Hi, I have a MFRC522 module, and I would like to implement it with 2.0 library. could I use this code?

I would also really like to know how to use a RFID-RC522 module instead of the PN532 NFC RFID Reader/Writer Module used in the example! The RC522 is included in a lot of different beginner kits.

💬 RFID Lock Sensor

21

11.7k

11.2k

113.0k