[solved] RFM69 based nodes unable to report Lib Version
Bug Reports
51
Posts
8
Posters
17.8k
Views
5
Watching
-
@TimO
Your screenshots are based on the old driver ;)
You need to use "rfm69_update branch" on my repo. the whole repo. It's based on dev branch, few days ago, with the latest driver.https://github.com/scalz/Mysensors/tree/rfm69_update
Thx for your tests and feedbacks :)
@scalz dammit! :-(
Okay, so this time the compiler is throwing errors.
Here are the ones I ruled out:
diff --git a/drivers/RFM69/RFM69.cpp b/drivers/RFM69/RFM69.cpp index 10d8369..f068ef1 100644 --- a/drivers/RFM69/RFM69.cpp +++ b/drivers/RFM69/RFM69.cpp @@ -79,16 +79,20 @@ LOCAL void RFM69_prepareSPITransaction(void) #endif // set RFM69 SPI settings + #if !defined(MY_SOFTSPI) && defined(SPI_HAS_TRANSACTION) _SPI.setDataMode(RFM69_SPI_DATA_MODE); _SPI.setBitOrder(RFM69_SPI_DATA_ORDER); _SPI.setClockDivider(RFM69_SPI_MAX_SPEED); // decided to slow down from DIV2 after SPI stalling in some instances, especially visible on mega1284p when RFM69 and FLASH chip both present + #endif #endif } LOCAL void RFM69_concludeSPITransaction(void) { -#ifdef SPI_HAS_TRANSACTION - _SPI.endTransaction(); +#ifdef SPI_HAS_TRANSACTION + #if !defined(MY_SOFTSPI) + _SPI.endTransaction(); + #endif #else // restore SPI settings to what they were before talking to RFM69 #if defined (SPCR) && defined (SPSR) @@ -199,7 +203,9 @@ LOCAL bool RFM69_initialise(const float frequency) // IRQ pinMode(RFM69_IRQ_DIO_PIN, INPUT); #if defined (SPI_HAS_TRANSACTION) && !defined (ESP8266) - _SPI.usingInterrupt(digitalPinToInterrupt(RFM69_IRQ_DIO_PIN)); + #if !defined(MY_SOFTSPI) + _SPI.usingInterrupt(digitalPinToInterrupt(RFM69_IRQ_DIO_PIN)); + #endif #endif attachInterrupt(digitalPinToInterrupt(RFM69_IRQ_DIO_PIN), RFM69_interruptHandler, RISING); @@ -1120,4 +1126,4 @@ void readAllRegs(void) } #endif } -} \ No newline at end of file +} diff --git a/drivers/RFM69/RFM69.h b/drivers/RFM69/RFM69.h index 433d6e1..8326f6e 100644 --- a/drivers/RFM69/RFM69.h +++ b/drivers/RFM69/RFM69.h @@ -78,11 +78,13 @@ #define RFM69_SPI_CS (SS) +#define RFM69_SPI_DATA_MODE SPI_MODE0 //!< SPI mode + // SPI settings #if defined (ARDUINO) && !defined (__arm__) && !defined (_SPI) #include <SPI.h> #if defined(MY_SOFTSPI) -SoftSPI<MY_SOFT_SPI_MISO_PIN, MY_SOFT_SPI_MOSI_PIN, MY_SOFT_SPI_SCK_PIN, MY_RFM69_SPI_DATA_MODE> _SPI; +SoftSPI<MY_SOFT_SPI_MISO_PIN, MY_SOFT_SPI_MOSI_PIN, MY_SOFT_SPI_SCK_PIN, RFM69_SPI_DATA_MODE> _SPI; #else #define _SPI SPI #endif @@ -100,7 +102,7 @@ extern HardwareSPI SPI; //!< SPI #define RFM69_SPI_DATA_ORDER MSBFIRST //!< SPI data order -#define RFM69_SPI_DATA_MODE SPI_MODE0 //!< SPI mode + #if !defined(MY_RFM69_SPI_MAX_SPEED) #define RFM69_SPI_MAX_SPEED (2000000ul) //!< SPI speed #else @@ -524,4 +526,4 @@ void readAllRegs(void); #endif -/** @}*/ \ No newline at end of file +/** @}*/(I only have time for a diff, sorry)
After the changes it gets stuck here:
In file included from /home/toberfoe/Arduino/libraries/MySensors/MySensors.h:306:0, from /home/toberfoe/ownCloud/workspace/Testumgebung/Gateway-5100-RFM69/GatewayW5100/GatewayW5100.ino:100: /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp:25:1: error: 'RFM69' does not name a type RFM69 _radio(MY_RF69_SPI_CS, MY_RF69_IRQ_PIN, MY_RFM69HW, MY_RF69_IRQ_NUM); ^ /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp: In function 'bool transportInit()': /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp:32:6: error: '_radio' was not declared in this scope if (_radio.initialize(MY_RFM69_FREQUENCY, _address, MY_RFM69_NETWORKID)) { ^ /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp: In function 'void transportSetAddress(uint8_t)': /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp:47:2: error: '_radio' was not declared in this scope _radio.setAddress(address); ^ /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp: In function 'bool transportSend(uint8_t, const void*, uint8_t)': /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp:57:9: error: '_radio' was not declared in this scope return _radio.sendWithRetry(to,data,len); ^ /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp: In function 'bool transportAvailable()': /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp:62:9: error: '_radio' was not declared in this scope return _radio.receiveDone(); ^ /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp: In function 'uint8_t transportReceive(void*)': /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp:73:28: error: '_radio' was not declared in this scope memcpy(data,(const void *)_radio.DATA, _radio.DATALEN); ^ /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp: In function 'void transportPowerDown()': /home/toberfoe/Arduino/libraries/MySensors/core/MyTransportRFM69.cpp:85:2: error: '_radio' was not declared in this scope _radio.sleep(); ^ exit status 1I have no time to investigate it further till saturday. :-/
-
this is because you have not completely updated your Mysensors folder.
The driver only is not enough because there are changes in others files like MyTransportRFM69.cpp, MyConfig etc.. -
this is because you have not completely updated your Mysensors folder.
The driver only is not enough because there are changes in others files like MyTransportRFM69.cpp, MyConfig etc.. -
@TimO
Oh my bad!
I didn't update MyTransportRFM69.cpp on my git (because i've two branch locally, and forgot about this one..). I've just pushed it. Downloaded my repo again, and it compiles fine now ;)sorry for waste of time, pff :blush:
Also, if someone wants to try using W5100 and RFM69 on the same SPI bus (so not in softspi mode). I'm interested to know if it's working. As W5100 and the new RFM69 are using SPI transactions, and in RFM69 it now uses the spi.usinginterrupts , so it might work.
Note: as it's hardwritten in w5100 lib (not cool!), easier for tests to use- D10 for your w5100 SPI CS
- what you want for your RFM69 SPI CS. example for D6, using #define MY_RFM69_SPI_CS 6
-
Okay, so next run. :D
I've pulled your repo and tested with the sketch above. The compile does not work for the GatewayW5100 example sketch either.
I have to apply the diff I've posted above to make it compile. With the diff applied the gateway starts, is pingable and reachable via telnet but does not receive any packets via RFM69.My guess: SoftSPI has no methods "usingInterrupt()", "beginTransaction()", and "endTransaction()" and that's the reason why no packets are received. In the current implementation these methods were not used.
I suppose there needs to be an implementation without transactions for SoftSPI?
Here's the output of the compile without the diff applied:
n file included from /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:36:0, from /home/toberfoe/Arduino/libraries/MySensors/MySensors.h:305, from /tmp/arduino_modified_sketch_920203/GatewayW5100.ino:116: /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.h:85:74: error: 'MY_RFM69_SPI_DATA_MODE' was not declared in this scope SoftSPI<MY_SOFT_SPI_MISO_PIN, MY_SOFT_SPI_MOSI_PIN, MY_SOFT_SPI_SCK_PIN, MY_RFM69_SPI_DATA_MODE> _SPI; ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.h:85:96: error: template argument 4 is invalid SoftSPI<MY_SOFT_SPI_MISO_PIN, MY_SOFT_SPI_MOSI_PIN, MY_SOFT_SPI_SCK_PIN, MY_RFM69_SPI_DATA_MODE> _SPI; ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.h:85:102: error: invalid type in declaration before ';' token SoftSPI<MY_SOFT_SPI_MISO_PIN, MY_SOFT_SPI_MOSI_PIN, MY_SOFT_SPI_SCK_PIN, MY_RFM69_SPI_DATA_MODE> _SPI; ^ In file included from /home/toberfoe/Arduino/libraries/MySensors/MySensors.h:305:0, from /tmp/arduino_modified_sketch_920203/GatewayW5100.ino:116: /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp: In function 'void RFM69_prepareSPITransaction()': /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:82:9: error: request for member 'setDataMode' in '_SPI', which is of non-class type 'int' _SPI.setDataMode(RFM69_SPI_DATA_MODE); ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:83:9: error: request for member 'setBitOrder' in '_SPI', which is of non-class type 'int' _SPI.setBitOrder(RFM69_SPI_DATA_ORDER); ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:84:9: error: request for member 'setClockDivider' in '_SPI', which is of non-class type 'int' _SPI.setClockDivider(RFM69_SPI_MAX_SPEED); // decided to slow down from DIV2 after SPI stalling in some instances, especially visible on mega1284p when RFM69 and FLASH chip both present ^ In file included from /home/toberfoe/Arduino/libraries/MySensors/MySensors.h:305:0, from /tmp/arduino_modified_sketch_920203/GatewayW5100.ino:116: /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp: In function 'void RFM69_concludeSPITransaction()': /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:91:9: error: request for member 'endTransaction' in '_SPI', which is of non-class type 'int' _SPI.endTransaction(); ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp: In function 'uint8_t RFM69_spiMultiByteTransfer(uint8_t, uint8_t*, uint8_t, bool)': /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:114:18: error: request for member 'transfer' in '_SPI', which is of non-class type 'int' status = _SPI.transfer(cmd); ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:117:24: error: request for member 'transfer' in '_SPI', which is of non-class type 'int' status = _SPI.transfer((uint8_t)0x00); ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:122:24: error: request for member 'transfer' in '_SPI', which is of non-class type 'int' status = _SPI.transfer(*current++); ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp: In function 'bool RFM69_initialise(float)': /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:190:9: error: request for member 'begin' in '_SPI', which is of non-class type 'int' _SPI.begin(); ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:202:9: error: request for member 'usingInterrupt' in '_SPI', which is of non-class type 'int' _SPI.usingInterrupt(digitalPinToInterrupt(RFM69_IRQ_DIO_PIN)); ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp: In function 'void RFM69_interruptHandler()': /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:232:15: error: request for member 'transfer' in '_SPI', which is of non-class type 'int' _SPI.transfer(RFM69_REG_FIFO & RFM69_READ_REGISTER); ^ /home/toberfoe/Arduino/libraries/MySensors/drivers/RFM69/RFM69.cpp:239:31: error: request for member 'transfer' in '_SPI', which is of non-class type 'int' *current++ = _SPI.transfer((uint8_t)0x00); ^ exit status 1 Fehler beim Kompilieren für das Board Arduino Nano. -
@TimO
Oh my bad!
I didn't update MyTransportRFM69.cpp on my git (because i've two branch locally, and forgot about this one..). I've just pushed it. Downloaded my repo again, and it compiles fine now ;)sorry for waste of time, pff :blush:
Also, if someone wants to try using W5100 and RFM69 on the same SPI bus (so not in softspi mode). I'm interested to know if it's working. As W5100 and the new RFM69 are using SPI transactions, and in RFM69 it now uses the spi.usinginterrupts , so it might work.
Note: as it's hardwritten in w5100 lib (not cool!), easier for tests to use- D10 for your w5100 SPI CS
- what you want for your RFM69 SPI CS. example for D6, using #define MY_RFM69_SPI_CS 6
-
@TimO
Oh my bad!
I didn't update MyTransportRFM69.cpp on my git (because i've two branch locally, and forgot about this one..). I've just pushed it. Downloaded my repo again, and it compiles fine now ;)sorry for waste of time, pff :blush:
Also, if someone wants to try using W5100 and RFM69 on the same SPI bus (so not in softspi mode). I'm interested to know if it's working. As W5100 and the new RFM69 are using SPI transactions, and in RFM69 it now uses the spi.usinginterrupts , so it might work.
Note: as it's hardwritten in w5100 lib (not cool!), easier for tests to use- D10 for your w5100 SPI CS
- what you want for your RFM69 SPI CS. example for D6, using #define MY_RFM69_SPI_CS 6
@scalz I downloaded your testbed and loaded a node with a basic script. It compiles ok, but I can't reach my gateway any longer. Do I have to update the gw as well? I'm using an ATmega328 with an RFM69W, CS=D10 and IRQ=D2 (Anarduino).
Looks inspiring with ATC, debug_verbose, getRSSI() and other improvements.Script used:
// Enable debug prints #define MY_DEBUG #define MY_DEBUG_VERBOSE_RFM69 // Enable and select radio type attached //#define MY_RADIO_NRF24 #define MY_RADIO_RFM69 #define MY_RFM69_FREQUENCY RFM69_433MHZ // Note. New format #define MY_NODE_ID 7 #include <MySensors.h> unsigned long SLEEP_TIME = 5000; // Sleep time between reads (in milliseconds) #define CHILD_ID 1 MyMessage msg(CHILD_ID, V_VAR1); int count = 0; void setup() { } void presentation() { // Send the sketch version information to the gateway and Controller sendSketchInfo("Test", "1.0"); // Register all sensors to gw (they will be created as child devices) present(CHILD_ID, S_CUSTOM); } void loop() { send(msg.set(count)); count++; if (count > 1000) { count=0; } wait(SLEEP_TIME); //sleep a bit. }Debug dump:
0 MCO:BGN:INIT NODE,CP=RRNNA--,VER=2.1.0-beta 4 TSM:INIT 4 TSF:WUR:MS=0 6 RFM69:INIT 7 RFM69:IRQ PIN=2,CS PIN=10 10 RFM69:PTX:LEVEL=5 dBm,reg=23 13 TSM:INIT:TSP OK 15 TSM:INIT:STATID=7 16 TSF:SID:OK,ID=7 18 TSM:FPAR 19 RFM69:SWR:Sending,to=255,retry=0 275 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 2282 !TSM:FPAR:NO REPLY 2284 TSM:FPAR 2285 RFM69:SWR:Sending,to=255,retry=0 2691 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 4698 !TSM:FPAR:NO REPLY 4700 TSM:FPAR 4701 RFM69:SWR:Sending,to=255,retry=0 5007 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 7014 !TSM:FPAR:NO REPLY 7016 TSM:FPAR 7017 RFM69:SWR:Sending,to=255,retry=0 7173 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 9180 !TSM:FPAR:FAIL 9181 TSM:FAIL:CNT=1 9183 TSM:FAIL:PDT 9185 RFM69:power down -
this is because you have not completely updated your Mysensors folder.
The driver only is not enough because there are changes in others files like MyTransportRFM69.cpp, MyConfig etc..@scalz Made some other tests and I get the same result.
- Testbed loaded in node only. No contact between gw and node.
- Testbed loaded in node and gw. No contact between gw and node.
- Testbed loaded in gw only. No contact between gw and node.
- @tekka RFM69DriverUpdate testbed loaded in node only. No contact between node and gw.
- Restoring node and gw with development branch. Everything goes back to normal.
GW uses hardware SPI for the radio and Ethernet unit as mentioned further up in this thread.
-
@TimO
oki, i'm fixing this, about your compil issue. i'll push today.@korttoma
I know about this ;) this is a problem related to the ethernet lib with pins hardwritten..Changes in new drivers should be able to handle hardware spi for w5100+radio on same bus. If taking care about the CS issue in ethernet lib. I've quickly looked and it seems that ethernet lib uses spi transaction, and rfm69 too now. So it should be ok in theory (for more infos, see spitransaction, and usinginterrupts).
D10 is default for w5100 in ethernet lib, but if not setting any define in Mysensors for radio, then it will be on D10 too.
- So if keeping W5100 D10, then we should have #define MY_RFM69_SPI_CS [your pin]
- Or hack the w5100 lib, and you can keep default D10 CS Mysensors define for radio.
So talking about this @jpaulin , could you tell me what are your CS pins? In your sketch above i don't see any define for this. So i assume you have modified the ethernet lib and keep Mysensors define for this, right ?
-
@TimO
oki, i'm fixing this, about your compil issue. i'll push today.@korttoma
I know about this ;) this is a problem related to the ethernet lib with pins hardwritten..Changes in new drivers should be able to handle hardware spi for w5100+radio on same bus. If taking care about the CS issue in ethernet lib. I've quickly looked and it seems that ethernet lib uses spi transaction, and rfm69 too now. So it should be ok in theory (for more infos, see spitransaction, and usinginterrupts).
D10 is default for w5100 in ethernet lib, but if not setting any define in Mysensors for radio, then it will be on D10 too.
- So if keeping W5100 D10, then we should have #define MY_RFM69_SPI_CS [your pin]
- Or hack the w5100 lib, and you can keep default D10 CS Mysensors define for radio.
So talking about this @jpaulin , could you tell me what are your CS pins? In your sketch above i don't see any define for this. So i assume you have modified the ethernet lib and keep Mysensors define for this, right ?
@scalz
On the test node CS = D10 (script above). On the gw the radio CS = D10 and the Ethernet CS = D7. D7 is set in the w5100.h file in the Ethernet library.Here's a debug dump with the RFM69 registers (from the test node):
0 MCO:BGN:INIT NODE,CP=RRNNA--,VER=2.1.0-beta 4 TSM:INIT 4 TSF:WUR:MS=0 6 RFM69:INIT 7 RFM69:IRQ PIN=2,CS PIN=10 9 RFM69:write register, reg=0x01, value=4 13 RFM69:write register, reg=0x02, value=0 17 RFM69:write register, reg=0x03, value=2 21 RFM69:write register, reg=0x04, value=64 24 RFM69:write register, reg=0x05, value=3 28 RFM69:write register, reg=0x06, value=51 32 RFM69:write register, reg=0x07, value=108 36 RFM69:write register, reg=0x08, value=64 40 RFM69:write register, reg=0x09, value=0 45 RFM69:write register, reg=0x18, value=136 48 RFM69:write register, reg=0x19, value=66 52 RFM69:write register, reg=0x26, value=7 56 RFM69:write register, reg=0x28, value=16 60 RFM69:write register, reg=0x29, value=220 64 RFM69:write register, reg=0x2e, value=136 68 RFM69:write register, reg=0x2f, value=170 72 RFM69:write register, reg=0x30, value=100 76 RFM69:write register, reg=0x37, value=212 80 RFM69:write register, reg=0x38, value=66 83 RFM69:write register, reg=0x39, value=255 88 RFM69:write register, reg=0x3a, value=255 92 RFM69:write register, reg=0x3c, value=5 96 RFM69:write register, reg=0x3d, value=16 100 RFM69:write register, reg=0x6f, value=48 104 RFM69:write register, reg=0x01, value=4 108 RFM69:read register, reg=0x27, value=128 112 RFM69:read register, reg=0x3d, value=16 115 RFM69:write register, reg=0x3d, value=16 119 RFM69:write register, reg=0x11, value=151 123 RFM69:PTX:LEVEL=5 dBm,reg=23 126 RFM69:read register, reg=0x02, value=0 131 RFM69:read register, reg=0x03, value=2 135 RFM69:read register, reg=0x04, value=64 138 RFM69:read register, reg=0x05, value=3 142 RFM69:read register, reg=0x06, value=51 146 RFM69:read register, reg=0x07, value=108 150 RFM69:read register, reg=0x08, value=64 154 RFM69:read register, reg=0x09, value=0 157 RFM69:read register, reg=0x30, value=100 161 TSM:INIT:TSP OK 163 TSM:INIT:STATID=7 165 RFM69:write register, reg=0x39, value=7 169 TSF:SID:OK,ID=7 172 TSM:FPAR 173 RFM69:SWR:Sending,to=255,retry=0 427 RFM69:read register, reg=0x27, value=128 431 RFM69:write register, reg=0x25, value=0 434 RFM69:write register, reg=0x01, value=12 441 RFM69:read register, reg=0x28, value=8 441 RFM69:write register, reg=0x25, value=64 441 RFM69:read register, reg=0x28, value=8 441 RFM69:write register, reg=0x01, value=16 442 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 2449 !TSM:FPAR:NO REPLY 2451 TSM:FPAR 2452 RFM69:SWR:Sending,to=255,retry=0 2455 RFM69:read register, reg=0x24, value=195 2859 RFM69:read register, reg=0x24, value=197 2863 RFM69:write register, reg=0x01, value=4 2866 RFM69:read register, reg=0x27, value=128 2871 RFM69:write register, reg=0x25, value=0 2874 RFM69:write register, reg=0x01, value=12 2881 RFM69:read register, reg=0x28, value=8 2881 RFM69:write register, reg=0x25, value=64 2881 RFM69:read register, reg=0x28, value=8 2881 RFM69:write register, reg=0x01, value=16 2882 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 4889 !TSM:FPAR:NO REPLY 4891 TSM:FPAR 4892 RFM69:SWR:Sending,to=255,retry=0 4895 RFM69:read register, reg=0x24, value=189 5199 RFM69:read register, reg=0x24, value=208 5203 RFM69:write register, reg=0x01, value=4 5207 RFM69:read register, reg=0x27, value=128 5212 RFM69:write register, reg=0x25, value=0 5215 RFM69:write register, reg=0x01, value=12 5222 RFM69:read register, reg=0x28, value=8 5222 RFM69:write register, reg=0x25, value=64 5222 RFM69:read register, reg=0x28, value=8 5222 RFM69:write register, reg=0x01, value=16 5223 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 7230 !TSM:FPAR:NO REPLY 7232 TSM:FPAR 7233 RFM69:SWR:Sending,to=255,retry=0 7236 RFM69:read register, reg=0x24, value=222 7390 RFM69:read register, reg=0x24, value=193 7394 RFM69:write register, reg=0x01, value=4 7397 RFM69:read register, reg=0x27, value=128 7402 RFM69:write register, reg=0x25, value=0 7405 RFM69:write register, reg=0x01, value=12 7412 RFM69:read register, reg=0x28, value=8 7412 RFM69:write register, reg=0x25, value=64 7412 RFM69:read register, reg=0x28, value=8 7412 RFM69:write register, reg=0x01, value=16 7413 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 9420 !TSM:FPAR:FAIL 9421 TSM:FAIL:CNT=1 9423 TSM:FAIL:PDT 9425 RFM69:power down 9427 RFM69:write register, reg=0x01, value=128 -
@TimO
oki, i'm fixing this, about your compil issue. i'll push today.@korttoma
I know about this ;) this is a problem related to the ethernet lib with pins hardwritten..Changes in new drivers should be able to handle hardware spi for w5100+radio on same bus. If taking care about the CS issue in ethernet lib. I've quickly looked and it seems that ethernet lib uses spi transaction, and rfm69 too now. So it should be ok in theory (for more infos, see spitransaction, and usinginterrupts).
D10 is default for w5100 in ethernet lib, but if not setting any define in Mysensors for radio, then it will be on D10 too.
- So if keeping W5100 D10, then we should have #define MY_RFM69_SPI_CS [your pin]
- Or hack the w5100 lib, and you can keep default D10 CS Mysensors define for radio.
So talking about this @jpaulin , could you tell me what are your CS pins? In your sketch above i don't see any define for this. So i assume you have modified the ethernet lib and keep Mysensors define for this, right ?
@scalz I finally got it going. I had to clean out all settings in both my gw, ethernet lib and the test-node. But it's a rather shaky experience. There are a lot of re-transmissions and failed sent messages that I don't see happening in my current set-up (in the Ethernet gw the file w5100.h has sei(); and cli(); interrupt macros added , as mentioned above in this thread).
As well there's an issue with the new ATC management. The transmission power is dropped 1 dB after every sent message in the test-node. Finally it ends up loosing contact with the gw using too low power. After automatic restart sequences it goes back to full power and starts again slowly dropping power until loosing contact again.
I think I'll have to stay with my current set-up until it becomes more stable.
Here's a debug-dump showing the re-transmissions and ATC power loss in the test-node:
0 MCO:BGN:INIT NODE,CP=RRNNA--,VER=2.1.0-beta 4 TSM:INIT 4 TSF:WUR:MS=0 6 RFM69:INIT 7 RFM69:IRQ PIN=2,CS PIN=10 10 RFM69:PTX:LEVEL=5 dBm,reg=23 13 TSM:INIT:TSP OK 15 TSM:INIT:STATID=7 16 TSF:SID:OK,ID=7 18 TSM:FPAR 19 RFM69:SWR:Sending,to=255,retry=0 275 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 2282 !TSM:FPAR:NO REPLY 2284 TSM:FPAR 2285 RFM69:SWR:Sending,to=255,retry=0 2691 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 3792 RFM69:RCV:Send ACK 3794 RFM69:SAC:Send ACK to=0,RSSI=-56 4100 TSF:MSG:READ,0-0-7,s=255,c=3,t=8,pt=1,l=1,sg=0:0 4105 TSF:MSG:FPAR OK,ID=0,D=1 4323 RFM69:RCV:Send ACK 4325 RFM69:SAC:Send ACK to=0,RSSI=-57 4482 TSF:MSG:READ,0-0-7,s=255,c=3,t=8,pt=1,l=1,sg=0:0 4698 TSM:FPAR:OK 4699 TSM:ID 4700 TSM:ID:OK 4702 TSM:UPL 4703 RFM69:SWR:Sending,to=0,retry=0 5009 !RFM69:SWR:NACK 5010 RFM69:SWR:Sending,to=0,retry=1 5517 !RFM69:SWR:NACK 5518 RFM69:SWR:Sending,to=0,retry=2 5925 !RFM69:SWR:NACK 5926 RFM69:SWR:Sending,to=0,retry=3 6434 !RFM69:SWR:NACK 6435 RFM69:SWR:Sending,to=0,retry=4 6892 RFM69:SWR:ACK from=0,SEQ=5,RSSI=-58 6895 RFM69:ATC:ADJ TXL,cR=-58,tR=-80,TXL=4 6899 RFM69:PTX:LEVEL=4 dBm,reg=22 6902 TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 6945 RFM69:RCV:Send ACK 6947 RFM69:SAC:Send ACK to=0,RSSI=-56 7053 TSF:MSG:READ,0-0-7,s=255,c=3,t=25,pt=1,l=1,sg=0:1 7058 TSF:MSG:PONG RECV,HP=1 7060 TSM:UPL:OK 7062 TSM:READY:ID=7,PAR=0,DIS=1 7065 RFM69:SWR:Sending,to=0,retry=0 7171 !RFM69:SWR:NACK 7172 RFM69:SWR:Sending,to=0,retry=1 7680 !RFM69:SWR:NACK 7681 RFM69:SWR:Sending,to=0,retry=2 8088 !RFM69:SWR:NACK 8089 RFM69:SWR:Sending,to=0,retry=3 8596 !RFM69:SWR:NACK 8597 RFM69:SWR:Sending,to=0,retry=4 8654 RFM69:SWR:ACK from=0,SEQ=7,RSSI=-59 8658 RFM69:ATC:ADJ TXL,cR=-59,tR=-80,TXL=3 8662 RFM69:PTX:LEVEL=3 dBm,reg=21 8665 TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100 9108 RFM69:RCV:Send ACK 9110 RFM69:SAC:Send ACK to=0,RSSI=-56 9266 TSF:MSG:READ,0-0-7,s=255,c=3,t=15,pt=6,l=2,sg=0:0100 9271 RFM69:SWR:Sending,to=0,retry=0 9728 !RFM69:SWR:NACK 9729 RFM69:SWR:Sending,to=0,retry=1 10137 RFM69:SWR:ACK from=0,SEQ=9,RSSI=-60 10141 RFM69:ATC:ADJ TXL,cR=-60,tR=-80,TXL=2 10145 RFM69:PTX:LEVEL=2 dBm,reg=20 10148 TSF:MSG:SEND,7-7-0-0,s=255,c=0,t=17,pt=0,l=10,sg=0,ft=0,st=OK:2.1.0-beta 10156 RFM69:SWR:Sending,to=0,retry=0 10612 !RFM69:SWR:NACK 10614 RFM69:SWR:Sending,to=0,retry=1 10720 RFM69:SWR:ACK from=0,SEQ=10,RSSI=-62 10724 RFM69:ATC:ADJ TXL,cR=-62,tR=-80,TXL=1 10728 RFM69:PTX:LEVEL=1 dBm,reg=19 10731 TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0 12737 RFM69:SWR:Sending,to=0,retry=0 13143 !RFM69:SWR:NACK 13145 RFM69:SWR:Sending,to=0,retry=1 13301 !RFM69:SWR:NACK 13303 RFM69:SWR:Sending,to=0,retry=2 13409 !RFM69:SWR:NACK 13411 RFM69:SWR:Sending,to=0,retry=3 13568 RFM69:SWR:ACK from=0,SEQ=11,RSSI=-63 13572 RFM69:ATC:ADJ TXL,cR=-63,tR=-80,TXL=0 13576 RFM69:PTX:LEVEL=0 dBm,reg=18 13579 TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=11,pt=0,l=4,sg=0,ft=0,st=OK:Test 13586 RFM69:SWR:Sending,to=0,retry=0 13892 !RFM69:SWR:NACK 13894 RFM69:SWR:Sending,to=0,retry=1 14251 RFM69:SWR:ACK from=0,SEQ=12,RSSI=-64 14255 RFM69:ATC:ADJ TXL,cR=-64,tR=-80,TXL=-1 14259 RFM69:PTX:LEVEL=-1 dBm,reg=17 14262 TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=OK:1.0 14268 RFM69:SWR:Sending,to=0,retry=0 14675 !RFM69:SWR:NACK 14678 RFM69:SWR:Sending,to=0,retry=1 14784 !RFM69:SWR:NACK 14786 RFM69:SWR:Sending,to=0,retry=2 15242 RFM69:SWR:ACK from=0,SEQ=13,RSSI=-64 15246 RFM69:ATC:ADJ TXL,cR=-64,tR=-80,TXL=-2 15249 RFM69:PTX:LEVEL=-2 dBm,reg=16 15253 TSF:MSG:SEND,7-7-0-0,s=1,c=0,t=23,pt=0,l=0,sg=0,ft=0,st=OK: 15259 MCO:REG:REQ 15260 RFM69:SWR:Sending,to=0,retry=0 15717 !RFM69:SWR:NACK 15719 RFM69:SWR:Sending,to=0,retry=1 16125 RFM69:SWR:ACK from=0,SEQ=14,RSSI=-66 16130 RFM69:ATC:ADJ TXL,cR=-66,tR=-80,TXL=-3 16134 RFM69:PTX:LEVEL=-3 dBm,reg=15 16137 TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2 16179 RFM69:RCV:Send ACK 16182 RFM69:SAC:Send ACK to=0,RSSI=-56 16337 TSF:MSG:READ,0-0-7,s=255,c=3,t=27,pt=1,l=1,sg=0:1 16343 MCO:PIM:NODE REG=1 16345 MCO:BGN:STP 16347 MCO:BGN:INIT OK,TSP=1 16349 RFM69:SWR:Sending,to=0,retry=0 16706 !RFM69:SWR:NACK 16708 RFM69:SWR:Sending,to=0,retry=1 16814 RFM69:SWR:ACK from=0,SEQ=16,RSSI=-64 16818 RFM69:ATC:ADJ TXL,cR=-64,tR=-80,TXL=-4 16822 RFM69:PTX:LEVEL=-4 dBm,reg=14 16825 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:0 21831 RFM69:SWR:Sending,to=0,retry=0 22337 !RFM69:SWR:NACK 22339 RFM69:SWR:Sending,to=0,retry=1 22445 !RFM69:SWR:NACK 22447 RFM69:SWR:Sending,to=0,retry=2 22553 RFM69:SWR:ACK from=0,SEQ=17,RSSI=-65 22557 RFM69:ATC:ADJ TXL,cR=-65,tR=-80,TXL=-5 22561 RFM69:PTX:LEVEL=-5 dBm,reg=13 22564 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:1 27571 RFM69:SWR:Sending,to=0,retry=0 27727 !RFM69:SWR:NACK 27729 RFM69:SWR:Sending,to=0,retry=1 27835 !RFM69:SWR:NACK 27837 RFM69:SWR:Sending,to=0,retry=2 28080 RFM69:SWR:ACK from=0,SEQ=18,RSSI=-65 28084 RFM69:ATC:ADJ TXL,cR=-65,tR=-80,TXL=-6 28088 RFM69:PTX:LEVEL=-6 dBm,reg=12 28091 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:2 33097 RFM69:SWR:Sending,to=0,retry=0 33253 !RFM69:SWR:NACK 33255 RFM69:SWR:Sending,to=0,retry=1 33461 !RFM69:SWR:NACK 33463 RFM69:SWR:Sending,to=0,retry=2 33569 RFM69:SWR:ACK from=0,SEQ=19,RSSI=-69 33573 RFM69:ATC:ADJ TXL,cR=-69,tR=-80,TXL=-7 33577 RFM69:PTX:LEVEL=-7 dBm,reg=11 33581 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:3 38587 RFM69:SWR:Sending,to=0,retry=0 38693 !RFM69:SWR:NACK 38695 RFM69:SWR:Sending,to=0,retry=1 38852 RFM69:SWR:ACK from=0,SEQ=20,RSSI=-69 38856 RFM69:ATC:ADJ TXL,cR=-69,tR=-80,TXL=-8 38860 RFM69:PTX:LEVEL=-8 dBm,reg=10 38863 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:4 43870 RFM69:SWR:Sending,to=0,retry=0 44076 !RFM69:SWR:NACK 44078 RFM69:SWR:Sending,to=0,retry=1 44284 !RFM69:SWR:NACK 44286 RFM69:SWR:Sending,to=0,retry=2 44544 RFM69:SWR:ACK from=0,SEQ=21,RSSI=-71 44548 RFM69:ATC:ADJ TXL,cR=-71,tR=-80,TXL=-9 44552 RFM69:PTX:LEVEL=-9 dBm,reg=9 44555 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:5 49561 RFM69:SWR:Sending,to=0,retry=0 49967 !RFM69:SWR:NACK 49969 RFM69:SWR:Sending,to=0,retry=1 50275 !RFM69:SWR:NACK 50277 RFM69:SWR:Sending,to=0,retry=2 50734 RFM69:SWR:ACK from=0,SEQ=22,RSSI=-73 50738 RFM69:ATC:ADJ TXL,cR=-73,tR=-80,TXL=-10 50742 RFM69:PTX:LEVEL=-10 dBm,reg=8 50745 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:6 55751 RFM69:SWR:Sending,to=0,retry=0 55957 !RFM69:SWR:NACK 55959 RFM69:SWR:Sending,to=0,retry=1 56366 RFM69:SWR:ACK from=0,SEQ=23,RSSI=-69 56370 RFM69:ATC:ADJ TXL,cR=-69,tR=-80,TXL=-11 56374 RFM69:PTX:LEVEL=-11 dBm,reg=7 56377 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:7 61383 RFM69:SWR:Sending,to=0,retry=0 61539 !RFM69:SWR:NACK 61541 RFM69:SWR:Sending,to=0,retry=1 61690 RFM69:SWR:ACK from=0,SEQ=24,RSSI=-71 61694 RFM69:ATC:ADJ TXL,cR=-71,tR=-80,TXL=-12 61699 RFM69:PTX:LEVEL=-12 dBm,reg=6 61702 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:8 66708 RFM69:SWR:Sending,to=0,retry=0 67064 !RFM69:SWR:NACK 67066 RFM69:SWR:Sending,to=0,retry=1 67322 !RFM69:SWR:NACK 67324 RFM69:SWR:Sending,to=0,retry=2 67781 RFM69:SWR:ACK from=0,SEQ=25,RSSI=-73 67785 RFM69:ATC:ADJ TXL,cR=-73,tR=-80,TXL=-13 67789 RFM69:PTX:LEVEL=-13 dBm,reg=5 67792 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:9 72799 RFM69:SWR:Sending,to=0,retry=0 73056 !RFM69:SWR:NACK 73058 RFM69:SWR:Sending,to=0,retry=1 73314 RFM69:SWR:ACK from=0,SEQ=26,RSSI=-74 73318 RFM69:ATC:ADJ TXL,cR=-74,tR=-80,TXL=-14 73322 RFM69:PTX:LEVEL=-14 dBm,reg=4 73325 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:10 78331 RFM69:SWR:Sending,to=0,retry=0 78787 !RFM69:SWR:NACK 78789 RFM69:SWR:Sending,to=0,retry=1 79195 RFM69:SWR:ACK from=0,SEQ=27,RSSI=-76 79199 RFM69:ATC:ADJ TXL,cR=-76,tR=-80,TXL=-15 79203 RFM69:PTX:LEVEL=-15 dBm,reg=3 79206 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:11 84212 RFM69:SWR:Sending,to=0,retry=0 84319 !RFM69:SWR:NACK 84321 RFM69:SWR:Sending,to=0,retry=1 84827 !RFM69:SWR:NACK 84829 RFM69:SWR:Sending,to=0,retry=2 85285 RFM69:SWR:ACK from=0,SEQ=28,RSSI=-76 85289 RFM69:ATC:ADJ TXL,cR=-76,tR=-80,TXL=-16 85294 RFM69:PTX:LEVEL=-16 dBm,reg=2 85297 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:12 90303 RFM69:SWR:Sending,to=0,retry=0 90459 !RFM69:SWR:NACK 90461 RFM69:SWR:Sending,to=0,retry=1 90567 !RFM69:SWR:NACK 90569 RFM69:SWR:Sending,to=0,retry=2 90676 !RFM69:SWR:NACK 90678 RFM69:SWR:Sending,to=0,retry=3 91034 RFM69:SWR:ACK from=0,SEQ=29,RSSI=-75 91038 RFM69:ATC:ADJ TXL,cR=-75,tR=-80,TXL=-17 91042 RFM69:PTX:LEVEL=-17 dBm,reg=1 91045 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:13 96052 RFM69:SWR:Sending,to=0,retry=0 96508 !RFM69:SWR:NACK 96510 RFM69:SWR:Sending,to=0,retry=1 96818 !RFM69:SWR:NACK 96820 RFM69:SWR:Sending,to=0,retry=2 97226 RFM69:SWR:ACK from=0,SEQ=30,RSSI=-78 97230 RFM69:ATC:ADJ TXL,cR=-78,tR=-80,TXL=-18 97234 RFM69:PTX:LEVEL=-18 dBm,reg=0 97238 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:14 102244 RFM69:SWR:Sending,to=0,retry=0 102700 !RFM69:SWR:NACK 102702 RFM69:SWR:Sending,to=0,retry=1 103158 !RFM69:SWR:NACK 103160 RFM69:SWR:Sending,to=0,retry=2 103566 !RFM69:SWR:NACK 103568 RFM69:SWR:Sending,to=0,retry=3 103874 !RFM69:SWR:NACK 103876 RFM69:SWR:Sending,to=0,retry=4 104232 !RFM69:SWR:NACK 104235 !TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=NACK:15 109241 RFM69:SWR:Sending,to=0,retry=0 109347 !RFM69:SWR:NACK 109349 RFM69:SWR:Sending,to=0,retry=1 109706 !RFM69:SWR:NACK 109708 RFM69:SWR:Sending,to=0,retry=2 109914 !RFM69:SWR:NACK 109916 RFM69:SWR:Sending,to=0,retry=3 110322 !RFM69:SWR:NACK 110324 RFM69:SWR:Sending,to=0,retry=4 110780 !RFM69:SWR:NACK 110782 !TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=1,st=NACK:16 115788 RFM69:SWR:Sending,to=0,retry=0 115894 !RFM69:SWR:NACK 115896 RFM69:SWR:Sending,to=0,retry=1 116202 !RFM69:SWR:NACK 116204 RFM69:SWR:Sending,to=0,retry=2 116410 !RFM69:SWR:NACK 116412 RFM69:SWR:Sending,to=0,retry=3 116768 !RFM69:SWR:NACK 116770 RFM69:SWR:Sending,to=0,retry=4 117176 !RFM69:SWR:NACK 117178 !TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=2,st=NACK:17 122184 RFM69:SWR:Sending,to=0,retry=0 122690 !RFM69:SWR:NACK 122692 RFM69:SWR:Sending,to=0,retry=1 122798 !RFM69:SWR:NACK 122800 RFM69:SWR:Sending,to=0,retry=2 123206 !RFM69:SWR:NACK 123208 RFM69:SWR:Sending,to=0,retry=3 123464 !RFM69:SWR:NACK 123466 RFM69:SWR:Sending,to=0,retry=4 123972 !RFM69:SWR:NACK 123974 !TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=3,st=NACK:18 128980 RFM69:SWR:Sending,to=0,retry=0 129337 !RFM69:SWR:NACK 129339 RFM69:SWR:Sending,to=0,retry=1 129795 !RFM69:SWR:NACK 129797 RFM69:SWR:Sending,to=0,retry=2 130203 !RFM69:SWR:NACK 130205 RFM69:SWR:Sending,to=0,retry=3 130711 !RFM69:SWR:NACK 130713 RFM69:SWR:Sending,to=0,retry=4 131169 !RFM69:SWR:NACK 131171 !TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=4,st=NACK:19 136177 RFM69:SWR:Sending,to=0,retry=0 136584 !RFM69:SWR:NACK 136586 RFM69:SWR:Sending,to=0,retry=1 136792 !RFM69:SWR:NACK 136794 RFM69:SWR:Sending,to=0,retry=2 136900 !RFM69:SWR:NACK 136902 RFM69:SWR:Sending,to=0,retry=3 137158 !RFM69:SWR:NACK 137160 RFM69:SWR:Sending,to=0,retry=4 137267 !RFM69:SWR:NACK 137269 !TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=5,st=NACK:20 137275 !TSM:READY:UPL FAIL,SNP 137278 TSM:FPAR 137279 RFM69:SWR:Sending,to=255,retry=0 137436 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=6,st=OK: 139443 !TSM:FPAR:NO REPLY 139445 TSM:FPAR 139446 RFM69:SWR:Sending,to=255,retry=0 139753 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 141760 !TSM:FPAR:NO REPLY 141762 TSM:FPAR 141763 RFM69:SWR:Sending,to=255,retry=0 141920 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 142275 !TSF:SND:TNR 143927 !TSM:FPAR:NO REPLY 143929 TSM:FPAR 143931 RFM69:SWR:Sending,to=255,retry=0 144387 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 145031 RFM69:RCV:Send ACK 145034 RFM69:SAC:Send ACK to=0,RSSI=-55 145139 TSF:MSG:READ,0-0-7,s=255,c=3,t=8,pt=1,l=1,sg=0:0 145144 TSF:MSG:FPAR OK,ID=0,D=1 145561 RFM69:RCV:Send ACK 145564 RFM69:SAC:Send ACK to=0,RSSI=-56 145619 TSF:MSG:READ,0-0-7,s=255,c=3,t=8,pt=1,l=1,sg=0:0 146391 RFM69:RCV:Send ACK 146393 RFM69:SAC:Send ACK to=0,RSSI=-56 146599 TSF:MSG:READ,0-0-7,s=255,c=3,t=8,pt=1,l=1,sg=0:0 146605 TSM:FPAR:OK 146607 TSM:ID 146608 TSM:ID:OK 146610 TSM:UPL 146611 RFM69:SWR:Sending,to=0,retry=0 146869 !RFM69:SWR:NACK 146871 RFM69:SWR:Sending,to=0,retry=1 147227 !RFM69:SWR:NACK 147229 RFM69:SWR:Sending,to=0,retry=2 147435 !RFM69:SWR:NACK 147437 RFM69:SWR:Sending,to=0,retry=3 147793 !RFM69:SWR:NACK 147795 RFM69:SWR:Sending,to=0,retry=4 148202 !RFM69:SWR:NACK 148204 !TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=NACK:1 148210 !TSF:SND:TNR 150211 TSM:UPL 150212 RFM69:SWR:Sending,to=0,retry=0 150468 !RFM69:SWR:NACK 150470 RFM69:SWR:Sending,to=0,retry=1 150827 !RFM69:SWR:NACK 150829 RFM69:SWR:Sending,to=0,retry=2 151285 !RFM69:SWR:NACK 151287 RFM69:SWR:Sending,to=0,retry=3 151743 !RFM69:SWR:NACK 151745 RFM69:SWR:Sending,to=0,retry=4 152281 !RFM69:SWR:NACK 152283 !TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=1,st=NACK:1 153212 !TSF:SND:TNR 154290 TSM:UPL 154291 RFM69:SWR:Sending,to=0,retry=0 154797 !RFM69:SWR:NACK 154799 RFM69:SWR:Sending,to=0,retry=1 154905 !RFM69:SWR:NACK 154907 RFM69:SWR:Sending,to=0,retry=2 155063 !RFM69:SWR:NACK 155065 RFM69:SWR:Sending,to=0,retry=3 155471 !RFM69:SWR:NACK 155473 RFM69:SWR:Sending,to=0,retry=4 155629 !RFM69:SWR:NACK 155631 !TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=2,st=NACK:1 157638 TSM:UPL 157639 RFM69:SWR:Sending,to=0,retry=0 158095 !RFM69:SWR:NACK 158097 RFM69:SWR:Sending,to=0,retry=1 158203 !RFM69:SWR:NACK 158205 RFM69:SWR:Sending,to=0,retry=2 158562 !RFM69:SWR:NACK 158564 RFM69:SWR:Sending,to=0,retry=3 159020 !RFM69:SWR:NACK 159022 RFM69:SWR:Sending,to=0,retry=4 159178 !RFM69:SWR:NACK 159180 !TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=3,st=NACK:1 159186 !TSF:SND:TNR 161187 !TSM:UPL:FAIL 161188 TSM:FPAR 161190 RFM69:SWR:Sending,to=255,retry=0 161548 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=4,st=OK: 163555 !TSM:FPAR:NO REPLY 163557 TSM:FPAR 163558 RFM69:SWR:Sending,to=255,retry=0 163965 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 164188 !TSF:SND:TNR 165974 !TSM:FPAR:NO REPLY 165976 TSM:FPAR 165978 RFM69:SWR:Sending,to=255,retry=0 166384 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 168391 !TSM:FPAR:NO REPLY 168393 TSM:FPAR 168394 RFM69:SWR:Sending,to=255,retry=0 168651 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 169189 !TSF:SND:TNR 170658 !TSM:FPAR:FAIL 170660 TSM:FAIL:CNT=1 170662 TSM:FAIL:PDT 170664 RFM69:power down 174190 !TSF:SND:TNR 179191 !TSF:SND:TNR 180668 TSM:FAIL:RE-INIT 180670 TSM:INIT 180671 RFM69:INIT 180673 RFM69:IRQ PIN=2,CS PIN=10 180677 RFM69:PTX:LEVEL=5 dBm,reg=23 180680 TSM:INIT:TSP OK 180682 TSM:INIT:STATID=7 180685 TSF:SID:OK,ID=7 180687 TSM:FPAR 180688 RFM69:SWR:Sending,to=255,retry=0 180795 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 182228 RFM69:RCV:Send ACK 182231 RFM69:SAC:Send ACK to=0,RSSI=-55 182337 TSF:MSG:READ,0-0-7,s=255,c=3,t=8,pt=1,l=1,sg=0:0 182342 TSF:MSG:FPAR OK,ID=0,D=1 182530 RFM69:RCV:Send ACK 182532 RFM69:SAC:Send ACK to=0,RSSI=-56 182588 TSF:MSG:READ,0-0-7,s=255,c=3,t=8,pt=1,l=1,sg=0:0 182802 TSM:FPAR:OK 182803 TSM:ID 182805 TSM:ID:OK 182806 TSM:UPL 182808 RFM69:SWR:Sending,to=0,retry=0 182914 !RFM69:SWR:NACK 182916 RFM69:SWR:Sending,to=0,retry=1 183322 RFM69:SWR:ACK from=0,SEQ=4,RSSI=-57 183326 RFM69:ATC:ADJ TXL,cR=-57,tR=-80,TXL=4 183330 RFM69:PTX:LEVEL=4 dBm,reg=22 183333 TSF:MSG:SEND,7-7-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 183378 RFM69:RCV:Send ACK 183380 RFM69:SAC:Send ACK to=0,RSSI=-55 183737 TSF:MSG:READ,0-0-7,s=255,c=3,t=25,pt=1,l=1,sg=0:1 183742 TSF:MSG:PONG RECV,HP=1 183745 TSM:UPL:OK 183746 TSM:READY:ID=7,PAR=0,DIS=1 183888 RFM69:RCV:Send ACK 183890 RFM69:SAC:Send ACK to=0,RSSI=-56 184047 TSF:MSG:READ,0-0-7,s=255,c=3,t=25,pt=1,l=1,sg=0:1 184052 !TSF:MSG:PONG RECV,INACTIVE 184192 RFM69:SWR:Sending,to=0,retry=0 184698 !RFM69:SWR:NACK 184700 RFM69:SWR:Sending,to=0,retry=1 185057 RFM69:SWR:ACK from=0,SEQ=7,RSSI=-59 185061 RFM69:ATC:ADJ TXL,cR=-59,tR=-80,TXL=3 185065 RFM69:PTX:LEVEL=3 dBm,reg=21 185068 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:29 190074 RFM69:SWR:Sending,to=0,retry=0 190431 !RFM69:SWR:NACK 190433 RFM69:SWR:Sending,to=0,retry=1 190789 RFM69:SWR:ACK from=0,SEQ=8,RSSI=-60 190793 RFM69:ATC:ADJ TXL,cR=-60,tR=-80,TXL=2 190797 RFM69:PTX:LEVEL=2 dBm,reg=20 190800 TSF:MSG:SEND,7-7-0-0,s=1,c=1,t=24,pt=2,l=2,sg=0,ft=0,st=OK:30 195807 RFM69:SWR:Sending,to=0,retry=0 195963 !RFM69:SWR:NACK 195965 RFM69:SWR:Sending,to=0,retry=1 196122 RFM69:SWR:ACK from=0,SEQ=9,RSSI=-61 196126 RFM69:ATC:ADJ TXL,cR=-61,tR=-80,TXL=1 196130 RFM69:PTX:LEVEL=1 dBm,reg=19 -
@jpaulin
great to hear you got it working. i just wanted to know this.
i apologize, i forgot to mention that may need some cleaning of the settings.
I'll fix others ATC and others things ;) my online repo is complete yet.
thx for your feedback.
