trash



  • last few days my gateway receive too much messages with non-existing node and sensor id, or with existing node/sensor id and malformed data or data from other nodes/sensors.

    samples (from Raspberry PI MQTT gateway log)

    Oct 21 08:27:20 pi mysGateway[30406]: TSF:MSG:READ,2-2-0,s=167,c=1,t=0,pt=7,l=5,sg=0:23.5
    Oct 21 08:27:20 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/167/1/0/0
    Oct 21 08:27:20 pi mysGateway[30406]: TSF:MSG:READ,2-10-0,s=251,c=1,t=1,pt=7,l=5,sg=0:23.4
    Oct 21 08:27:20 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/251/1/0/1
    Oct 21 08:27:20 pi mysGateway[30406]: TSF:MSG:READ,130-10-0,s=167,c=1,t=0,pt=7,l=5,sg=0:23.5
    Oct 21 08:27:20 pi mysGateway[30406]: Sending message on topic: MyGW1-out/130/167/1/0/0
    
    

    but I have not node with id 130!

    Oct 21 12:06:02 pi mysGateway[30406]: TSF:MSG:READ,11-11-0,s=4,c=1,t=4,pt=7,l=5,sg=0:1013
    Oct 21 12:06:02 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/4/1/0/4
    Oct 21 12:06:02 pi mysGateway[30406]: TSF:MSG:READ,11-10-0,s=4,c=1,t=4,pt=7,l=5,sg=0:1013
    Oct 21 12:06:02 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/4/1/0/4
    Oct 21 12:06:02 pi mysGateway[30406]: TSF:MSG:READ,3-10-0,s=0,c=1,t=0,pt=7,l=5,sg=0:13.2
    Oct 21 12:06:02 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/0/1/0/0
    Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,3-3-0,s=3,c=1,t=23,pt=2,l=2,sg=0:98
    Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/3/1/0/23
    Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,3-3-0,s=4,c=1,t=23,pt=2,l=2,sg=0:8
    Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/4/1/0/23
    Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,11-11-0,s=0,c=1,t=0,pt=7,l=5,sg=0:12
    Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/0/1/0/0
    Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,3-10-0,s=4,c=1,t=23,pt=2,l=2,sg=0:8
    Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/4/1/0/23
    Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,11-10-0,s=4,c=1,t=4,pt=7,l=5,sg=0:13.3
    Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/4/1/0/4
    

    sensor 11/4 is atmosferic pressure bmp180. 16:03:04 gateway receive message from this sensor and value from sensor 3/0 (ds18b20)

    Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:READ,2-2-0,s=251,c=1,t=0,pt=7,l=5,sg=0:23.8
    Oct 21 14:37:17 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/251/1/0/0
    Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:READ,2-2-0,s=167,c=1,t=0,pt=7,l=5,sg=0:24.0
    Oct 21 14:37:17 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/167/1/0/0
    Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:READ,2-10-0,s=250,c=1,t=0,pt=7,l=5,sg=0:23.8
    Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:ACK REQ
    

    node 2 have not sensor 250. only 251


  • Hardware Contributor

    Any nerdy neighbour nearby that would use MySensors also ? 😄



  • no. i have not any nerdy neighbourd 🙂


  • Admin

    @b0rmann Sounds like power issue or bad/too long SPI wires.



  • @tekka

    gateway has 5-10cm. node - on pcb

    p.s. after clearing repeater node (#10) eeprom it looks better


Log in to reply
 

Suggested Topics

  • 3
  • 24
  • 2
  • 4
  • 2
  • 2

22
Online

11.2k
Users

11.1k
Topics

112.5k
Posts