Navigation

    • Register
    • Login
    • Search
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. b0rmann
    • Continue chat with b0rmann
    • Start new chat with b0rmann
    • Flag Profile
    • Profile
    • Following
    • Followers
    • Blocks
    • Topics
    • Posts
    • Best
    • Groups

    b0rmann

    @b0rmann

    11
    Reputation
    47
    Posts
    1003
    Profile views
    1
    Followers
    0
    Following
    Joined Last Online
    Location CZ
    b0rmann Follow

    Posts made by b0rmann

    • RE: rs485 on nano

      @Reza

      no. rs485 must have LINEAR BUS topology.

      posted in General Discussion
      b0rmann
    • RE: 💬 Building a Raspberry Pi Gateway

      every few days mysgw randomly dies 😞

      Jan 19 06:40:01 pi mysgw[17960]: TSF:MSG:READ,5-5-0,s=255,c=3,t=21,pt=1,l=1,sg=0:0
Jan 19 06:40:01 pi mysgw[17960]: Sending message on topic: mysensors/out/1/5/255/3/0/21
Jan 19 06:40:01 pi mysgw[17960]: TSF:MSG:READ,0-5-255,s=255,c=3,t=20,pt=0,l=0,sg=0:
Jan 19 06:40:01 pi mysgw[17960]: TSF:MSG:BC
Jan 19 06:40:01 pi systemd[1]: mysgw.service: main process exited, code=killed, status=11/SEGV
Jan 19 06:40:01 pi systemd[1]: Unit mysgw.service entered failed state.
      posted in Announcements
      b0rmann
    • RE: Instructions how-to use Zabbix as your Controller with MQTT, part 1

      @gohan

      integration to existing monitoring infrastructure

      posted in Controllers
      b0rmann
    • RE: 💬 Building a Raspberry Pi Gateway

      @Reza

      if you want use rpi /dev/ttyAMA0 for rs485 gateway -

      1. remove string "console=serial0,115200" from /boot/cmdline.txt
      2. add strings "enable_uart=1" and "dtoverlay=pi3-disable-bt" to /boot/config.txt (only on rpi3)
      3. reboot raspi
      posted in Announcements
      b0rmann
    • RE: Node only works for a few days

      ...same problem 😞

      posted in Troubleshooting
      b0rmann
    • RE: [Solved] routing problem?

      @tekka said:

      @b0rmann The routing tables look messed up - maybe worthwhile sending a clear routing table command (using C_INTERNAL / I_CHILDREN / C) to all repeaters and observe how they are re-established.

      problem solved after clearing routing via C_INTERNAL / I_DEBUG / E

      posted in Troubleshooting
      b0rmann
    • RE: trash

      @tekka

      gateway has 5-10cm. node - on pcb

      p.s. after clearing repeater node (#10) eeprom it looks better

      posted in Troubleshooting
      b0rmann
    • RE: trash

      no. i have not any nerdy neighbourd 🙂

      posted in Troubleshooting
      b0rmann
    • [Solved] routing problem?

      i have repeater node 2,3,5,and 10. and normal nodes 11 and 18

      getting route table from node 2

      !TSF:MSG:SEND,0-0-10-2,s=255,c=3,t=28,pt=0,l=1,sg=0,ft=0,st=NACK:R
TSF:MSG:READ,2-2-0,s=255,c=3,t=28,pt=0,l=1,sg=0:R
TSF:MSG:ACK
TSF:MSG:READ,2-2-0,s=255,c=3,t=28,pt=6,l=2,sg=0:000A
TSF:MSG:READ,2-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:000A
TSF:MSG:READ,2-2-0,s=255,c=3,t=28,pt=6,l=2,sg=0:040A
TSF:MSG:READ,2-10-0,s=251,c=1,t=0,pt=7,l=5,sg=0:23.6
TSF:MSG:READ,2-2-0,s=255,c=3,t=28,pt=6,l=2,sg=0:180A
TSF:MSG:READ,2-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:040A
TSF:MSG:READ,2-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:000A
TSF:MSG:READ,2-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:180A
TSF:MSG:READ,2-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:040A

      getting route table from node 3

      TSF:MSG:SEND,0-0-10-3,s=255,c=3,t=28,pt=0,l=1,sg=0,ft=0,st=OK:R
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=0,l=1,sg=0:R
TSF:MSG:ACK
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=6,l=2,sg=0:000A
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=0,l=1,sg=0:R
TSF:MSG:ACK
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=6,l=2,sg=0:000A
TSF:MSG:READ,3-10-0,s=255,c=3,t=28,pt=0,l=1,sg=0:R
TSF:MSG:ACK
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0101
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0C0A
TSF:MSG:READ,3-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:000A
TSF:MSG:READ,3-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0101
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=6,l=2,sg=0:190A
TSF:MSG:READ,3-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0C0A
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0101
TSF:MSG:READ,3-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:000A
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0C0A
TSF:MSG:READ,3-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:190A
TSF:MSG:READ,3-3-0,s=255,c=3,t=28,pt=6,l=2,sg=0:190A
TSF:MSG:READ,3-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0101
TSF:MSG:READ,3-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0C0A
TSF:MSG:READ,3-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:190A

      getting route table from node 5 (from 4 attempt):

      !TSF:MSG:SEND,0-0-5-5,s=255,c=3,t=28,pt=0,l=1,sg=0,ft=0,st=NACK:R
!TSF:MSG:SEND,0-0-5-5,s=255,c=3,t=28,pt=0,l=1,sg=0,ft=0,st=NACK:R
!TSF:MSG:SEND,0-0-5-5,s=255,c=3,t=28,pt=0,l=1,sg=0,ft=0,st=NACK:R
TSF:MSG:SEND,0-0-5-5,s=255,c=3,t=28,pt=0,l=1,sg=0,ft=0,st=OK:R
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=0,l=1,sg=0:R
TSF:MSG:ACK
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0000
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=0,l=1,sg=0:R
TSF:MSG:ACK
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0101
TSF:MSG:READ,3-10-0,s=0,c=1,t=0,pt=7,l=5,sg=0:11.9
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0202
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0000
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=0,l=1,sg=0:R
TSF:MSG:ACK
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:030A
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0101
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0505
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0202
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0A0A
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:030A
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0B0B
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0505
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1010
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0202
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0A0A
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:030A
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0B0B
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0505
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1010
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0202
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0A0A
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1111
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0B0B
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1212
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1111
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1313
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0A0A
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1212
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1414
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1111
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:6464
TSF:MSG:READ,5-10-0,s=251,c=3,t=28,pt=6,l=2,sg=0:1313
TSF:MSG:READ,5-5-0,s=255,c=3,t=28,pt=6,l=2,sg=0:6565
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1414
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:6464
TSF:MSG:READ,5-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:656

      getting route table from node 10

      !TSF:MSG:SEND,0-0-10-10,s=255,c=3,t=28,pt=0,l=1,sg=0,ft=0,st=NACK:R
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=0,l=1,sg=0:R
TSF:MSG:ACK
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0002
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0202
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0303
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:048C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0525
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:061C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0703
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:080C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:090C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0A02
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0B0B
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0C0C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:0E0C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1009
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1113
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1202
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1318
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1505
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1623
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1782
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1811
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:190C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:1C0C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:2202
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:230B
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:3031
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:3203
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:3603
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:4202
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:4303
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:4A03
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:52A2
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:6464
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:8011
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:8104
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:8206
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:830A
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:8619
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:8C18
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:9C19
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:A44E
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:AA5A
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:C11C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:CC0C
TSF:MSG:READ,10-10-0,s=255,c=3,t=28,pt=6,l=2,sg=0:CE4

      it's normal routing?

      posted in Troubleshooting
      b0rmann
    • trash

      last few days my gateway receive too much messages with non-existing node and sensor id, or with existing node/sensor id and malformed data or data from other nodes/sensors.

      samples (from Raspberry PI MQTT gateway log)

      Oct 21 08:27:20 pi mysGateway[30406]: TSF:MSG:READ,2-2-0,s=167,c=1,t=0,pt=7,l=5,sg=0:23.5
Oct 21 08:27:20 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/167/1/0/0
Oct 21 08:27:20 pi mysGateway[30406]: TSF:MSG:READ,2-10-0,s=251,c=1,t=1,pt=7,l=5,sg=0:23.4
Oct 21 08:27:20 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/251/1/0/1
Oct 21 08:27:20 pi mysGateway[30406]: TSF:MSG:READ,130-10-0,s=167,c=1,t=0,pt=7,l=5,sg=0:23.5
Oct 21 08:27:20 pi mysGateway[30406]: Sending message on topic: MyGW1-out/130/167/1/0/0

      but I have not node with id 130!

      Oct 21 12:06:02 pi mysGateway[30406]: TSF:MSG:READ,11-11-0,s=4,c=1,t=4,pt=7,l=5,sg=0:1013
Oct 21 12:06:02 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/4/1/0/4
Oct 21 12:06:02 pi mysGateway[30406]: TSF:MSG:READ,11-10-0,s=4,c=1,t=4,pt=7,l=5,sg=0:1013
Oct 21 12:06:02 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/4/1/0/4
Oct 21 12:06:02 pi mysGateway[30406]: TSF:MSG:READ,3-10-0,s=0,c=1,t=0,pt=7,l=5,sg=0:13.2
Oct 21 12:06:02 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/0/1/0/0
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,3-3-0,s=3,c=1,t=23,pt=2,l=2,sg=0:98
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/3/1/0/23
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,3-3-0,s=4,c=1,t=23,pt=2,l=2,sg=0:8
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/4/1/0/23
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,11-11-0,s=0,c=1,t=0,pt=7,l=5,sg=0:12
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/0/1/0/0
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,3-10-0,s=4,c=1,t=23,pt=2,l=2,sg=0:8
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/4/1/0/23
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,11-10-0,s=4,c=1,t=4,pt=7,l=5,sg=0:13.3
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/4/1/0/4

      sensor 11/4 is atmosferic pressure bmp180. 16:03:04 gateway receive message from this sensor and value from sensor 3/0 (ds18b20)

      Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:READ,2-2-0,s=251,c=1,t=0,pt=7,l=5,sg=0:23.8
Oct 21 14:37:17 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/251/1/0/0
Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:READ,2-2-0,s=167,c=1,t=0,pt=7,l=5,sg=0:24.0
Oct 21 14:37:17 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/167/1/0/0
Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:READ,2-10-0,s=250,c=1,t=0,pt=7,l=5,sg=0:23.8
Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:ACK REQ

      node 2 have not sensor 250. only 251

      posted in Troubleshooting
      b0rmann