💬 Smart Alarm Clock

[micah]

I found a library online.... #include <AnalogMatrixKeypad.h>

I made some modifications (although I can't quite remember what they were), I think about the number of buttons, or combinations, or target values.

But generally the library provided the 1 wire, resistor ladder and debouncing functionality I needed

[micah]

I often wish our fancy mysensor nRF chips only used 1 arduino wire :(

[dbemowsk]

@micah Picking resistor values based on the number of switches you have shouldn't be too terribly difficult. You ar just creating a voltage divider circuit. When pushing multiple buttons, you just have to look at the resistor values for the buttons you have and calculate out the parallel resistance. Then you just have to figure out the analog value for any key combinations you want to use and create IF or Switch/Case statements to perform your logic.

[dbemowsk]

So, I didn't look the sketch over for this, but I am planning on building one of these and I have some questions. Does this show in 12 hour or 24 hour format? If it is 12 hour, how do you indicate AM or PM? Also, do you have a way of indicating that alarms are set? I may add some LEDs for these features.

[dbemowsk]

Here is my start on this. No speaker yet and I haven't added the LEDs for AM/PM and alarms, but that will come.

I will need to make a bunch of modifications to the sketch. Mainly because I am using a different RTC module (DS1307). It is one that I have had laying around in my parts bin for years. I get a bunch of compile errors when I try to include the RTC library for this module.

Here is the board layout so far.

[micah]

@dbemowsk
To use a 24 hour clock switch the following bool

bool Screen_HourFormat24 = false;

I think I used the colon to signify that an alarm was set, I think I flashed it on and off. in the Update_Screen method

   if ((Alarm1_Enabled) && (!Keys_ShowAlarmOnScreen)){
      if(Screen_ClockPoint)ledScreen.point(POINT_ON);
      else ledScreen.point(POINT_OFF);
    } else
      ledScreen.point(POINT_ON);

[dbemowsk]

@micah said in 💬 Smart Alarm Clock:

To use a 24 hour clock switch the following bool

I wasn't necessarily saying that I wanted to switch to 24hr format. I was wondering if you had a way of indicating AM and PM when in 12 hour format.

@micah said in 💬 Smart Alarm Clock:

I think I used the colon to signify that an alarm was set, I think I flashed it on and off. in the Update_Screen method

I see, so when it is blinking there is an alarm and when it is on solid there is not. I may add a different alarm indicator..

One other question on this. I see you have 5 buttons on your switch panel. What were your planned uses of those 5 buttons? I didn't see anything documented on that.

[micah]

The method Check_KeyPad (Line 300) handles the buttons.
Currently my buttons do the following

• show/program alarm
• hour
• minute
• turn alarm on and off
• turn on or off nightlight

[micah]

Another thing that I've thought of is removing the RTC module completely since we can query the time from the server periodically.

This would save components and pins, but it would limit the clock to only working with the controller, whereas the current design allows it to run independently

[alowhum]

:-D Wow, what an amazing design.