W5100 MQTT gateway fails to connect to broker

[Matt Pitts]

I have always found everyone on this forum generally really helpful, so I'm hoping some will be able to help me solve my problem. I have recently been testing Home Assistant and I'm now trying to get mysenors up and running with it.

I already have the latest verison of mosquitto up and running on my RPI without any problems and I've been able to publish and subcribe to topics, so I know its working OK.

I have just compiled and uploaded the default W5100 MQTT gateway sketch and altered the various settings and when I restart the arduino I get the following in the serial monitor

IP: 192.ting MQTT connection...
IP: 192.168.0.87
0;255;3;0;9;Attempting MQTT connection...
0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
IP: 192.168.0.87
0;255;3;0;9;No registration required
0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1
IP: 192.168.0.87
0;255;3;0;9;Attempting MQTT connection...
IP: 192.168.0.87

So the gateway is never able to connect to the MQTT broker. I have double checked everything and restarted, recomplied and still no luck. Am I missing something obvious, Any help would be very much appreciated

[blacey]

@Matt-Pitts It would be helpful if you post your sketch... and possibly your mosquitto broker config file. .

[Matt Pitts]

It was a silly mistake, I have forgotten to uncomment the username and password, its working now :-)

[blacey]

@Matt-Pitts Excellent! :+1: