Showing N/A instead of last stored temperature
-
Hi,
Sometimes my VeraPlus loses connection to temperature sensor. If it happens, I'd like to see N/A (or someth. similar) as temperature, instead of last stored value.
Is there any way to change last stored temperature value to N/A if temperature sensor doesn't respond more than (say) 10 minutes? -
The purpose of my request is just to understand to see that sensors work correctly and haven't lost connection. Currently it's not obvious at all - I see last value which can be shown forever.
-
@r-nox, two issues:
- timestamp is not shown in most mobile clients, can be easily missed.
- there are timestamp for nodes, but it's not obvious what they mean, asked question here: https://forum.mysensors.org/topic/5882/last-update-node-field-in-vera-interface
-
@r-nox, Device List scree, "Last update" field under each node (not device/sensor).
-
@r-nox but not clear what the time there really means.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login