RPI Gateway MQTT - Attempting MQTT connection...Connected [Loop]

[Luiz Augusto Lago]

Hi All,
Has anyone ever had this problem? When I start the service, he it stay in loop waiting for connection with itself, this is normal?

My configure:

./configure --my-gateway=mqtt --my-controller-ip-address=192.168.1.157 --my-mqtt-publish-topic-prefix=mysensors-out --my-mqtt-subscribe-topic-prefix=mysensors-in --my-mqtt-client-id=mygateway1

Debug:

pi@octopi:~/MySensors $ sudo mysgw -d
mysgw: Starting gateway...
mysgw: Protocol version - 2.1.1
mysgw: MCO:BGN:INIT GW,CP=RNNG---,VER=2.1.1
mysgw: TSF:LRT:OK
mysgw: TSM:INIT
mysgw: TSF:WUR:MS=0
mysgw: TSM:INIT:TSP OK
mysgw: TSM:INIT:GW MODE
mysgw: TSM:READY:ID=0,PAR=0,DIS=0
mysgw: MCO:REG:NOT NEEDED
mysgw: MCO:BGN:STP
mysgw: MCO:BGN:INIT OK,TSP=1
mysgw: Attempting MQTT connection...
mysgw: connected to 192.168.1.157
mysgw: Attempting MQTT connection...
mysgw: connected to 192.168.1.157
mysgw: Attempting MQTT connection...
mysgw: connected to 192.168.1.157
mysgw: Attempting MQTT connection...
mysgw: connected to 192.168.1.157
mysgw: Attempting MQTT connection...
mysgw: connected to 192.168.1.157
mysgw: Attempting MQTT connection...
mysgw: connected to 192.168.1.157
mysgw: Attempting MQTT connection...

[gohan]

@Luiz-Augusto-Lago
You need to install mosquitto as mqtt broker (or whatever other mqtt broker you like)

[Luiz Augusto Lago]

@gohan Already installed :/

[Luiz Augusto Lago]

Done! I need reinstall Mosquitto (I don't know why, but works)...anyway... thanks for help!!