Node does not get an ID: !TSM:ID:FAIL

[gohan]

I suggest you run the clear eeprom sketch on the node and try again. On the RPI, where are you getting power for the NRF24 radio? Do you have also a capacitor on that radio? Did you try setting power level to MIN ?

[ascanious]

@gohan I already tried it, but it didn't work.

Anyway, now it's working. I added an Arduino which acts now like the gateway. I don't have any idea why it was not working only with the Pi.

Thanks to everyone who helped me.

[gohan]

Probably the rpi couldn't supply enough power

[Tim76]

@ascanious Had the same problem......replaced the radio on the node..... problem solved......

[Fraid]

Hello, I also had the same issue, unfortunately I can't fix it.
I using socket adapter and everything is usb powered. This configuration has been working well since september 2016.

Last week I decided to update to version 2.1.1 because I need to create a new door sensor. Seen that upgrade I can’t get anything working anymore. I have been try ClearEepromConfig, without success. Verify many time my wiring (Yes many time!). I also force MY_NODE_ID and MY_PARENT_NODE_ID.

So today I decide to get back to version 2.0.0 and still can’t connect. Luckyly I kept one sensor from being upgraded and this one worked. Look like all sensor that have been upgraded is likely of broken.

I have been searching and I’m not the only one, mostly the issue is because of power issue. Log parser also say "Finding parent failed","Power-down transport" but why people get power issue after updating to 2.1.* ?
If someone can tell what should I look for now, at least how to roll back to the 2.0.0.

GW: Arduino uno W5100-NRF24-L01+PA+LNA
NODE: Arduino nano-5v NRF24
Log:

720991 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
722998 !TSM:FPAR:NO REPLY
723000 TSM:FPAR
723003 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
725010 !TSM:FPAR:NO REPLY
725012 TSM:FPAR
725015 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
727022 !TSM:FPAR:NO REPLY
727024 TSM:FPAR
727027 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
729034 !TSM:FPAR:FAIL
729036 TSM:FAIL:CNT=7
729038 TSM:FAIL:PDT

[gohan]

If you want to roll back to library version 2.0 just go to library manager and choose mysensors library and from drop down menu select the version you want. Are you sure you didn't make any customization (channel, encryption, etc)? Because if you upgrade library those get overwritten

[rejoe2]

@Fraid-DIRON Did you check wheter your GW is rebooting very often? Could be enough to downgrade the AVR board definition to Version <=1.6.11.

[Fraid]

@gohan I did roll back but doesn't work. And by the way I can't downgrade to 2.0.0 from library manager. I'll post the error later but it's like the 2.0.0 does not exist, because I can downgrade to 2.1.0. Anyway I did it by downloading the package from mysensor download page.

@rejoe2 You may got it! I was using version 1.6.15 but I can't find it anymore in library manager. So can't downgrade, I'll search more carefully tonight.

[rejoe2]

@Fraid-DIRON Just to clarify that point: The board definition is not changed via library manager but via board manager (Tools menu, as fas as I remember).
Afaik, Versions starting with 1.6.18 should be ok also.

[gohan]

@Fraid-DIRON what IDE version are you using?

[Fraid]

@rejoe2 roll back to MySensor 2.0.0 and AVR to (1.6.15 then 1.6.10 then 1.6.11). Cleer eeprom of both GW and node each time. Also restart IDE each time. And still can't connect.

But I get back to AVR 1.6.18 and it's working now! Only for node with MS 2.0.0. So everything is back to normal except that I can't upgrade to MS 2.1.1 :(

@gohan No customization and I'm using version 1.6.9.
FYI error was: CRC doesn't match. File is corrupted. java.lang.RuntimeException: java.lang.Exception: CRC doesn't match. File is corrupted. at cc.arduino.contributions.libraries.ui.LibraryManagerUI.lambda$onInstallPressed$12(LibraryManagerUI.java:231) at java.lang.Thread.run(Thread.java:745) Caused by: java.lang.Exception: CRC doesn't match. File is corrupted. at cc.arduino.contributions.DownloadableContributionsDownloader.download(DownloadableContributionsDownloader.java:77) at cc.arduino.contributions.libraries.LibraryInstaller.install(LibraryInstaller.java:97) at cc.arduino.contributions.libraries.ui.LibraryManagerUI.lambda$onInstallPressed$12(LibraryManagerUI.java:227) ... 1 more

[gohan]

Maybe it's time to upgrade it to 1.8.2? ☺️

[Fraid]

@gohan Just did it ! everything is up to date and work thank you :D.