Problem with Rpi mqtt gateway

[tchoblond59]

Ok. I'am just using it like this for testing. When i will be ready i'am gonna make or buy an all in one hat for my rpi. But i'am gonna look at your nrf24 socket

[gohan]

I like those because I can test different modules very quickly

[tchoblond59]

Can you post the link ?

[gohan]

http://www.gearbest.com/transmitters-receivers-module/pp_453011.html

[rhannink]

This post is deleted!

[rozpruwacz]

@mfalkvidd said in Problem with Rpi mqtt gateway:

LNA

why is that ? How much current the PA+LNA version consumes ? a have PA+LNA module connected directly to the 3.3V pi power pin and it works without problems. And actually during nrf initialization the amplifiers are disabled so the power consumptyion is much lower, this can;t be the cause of the initialization problem.

[gohan]

not all rpi are built equal and not all nrf24 modules are the same :)

[rozpruwacz]

I suppose You're right :P

[mfalkvidd]

Running electronics outside of the specification results in undefined behavior. That means that it sometimes works and sometimes not. And often it half-works.

[rozpruwacz]

yes, I understand that, I have a masters degree in electronics ;) but rpi has 1A capable buck converter on 3.3V rail so the question is how much current consumes the PA+LNA nrf module so it may not fit into the power budget ?