NRF24L01 & HLK-pm01
-
Hello,
I have made a PCB for a relay with nrf24L01, attiny and HLK-PM01.
If I feed the pcb with the arduino, with 3v or 5v I have no problem, the relay switches but when the PCB feed whith the electric outlet the relay don't switch always.
I don't know what, maybe the radio signal of nrf24 dont received.Have you an idea?
Thank you
-
Hello,
I have made a PCB for a relay with nrf24L01, attiny and HLK-PM01.
If I feed the pcb with the arduino, with 3v or 5v I have no problem, the relay switches but when the PCB feed whith the electric outlet the relay don't switch always.
I don't know what, maybe the radio signal of nrf24 dont received.Have you an idea?
Thank you
Welcome to the MySensors community @alb12
The quickest way to see what is happening is to activate serial debug. The debug output will show what happens.
See https://www.mysensors.org/build/debug#enabling-debug-and-monitoring-the-logs for more detailed information.
-
Use debugging LED :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login