Problem with serial gateway on Arduino Mega (only local node)



  • Hello
    I want to start my project with mysensors gateway connected via serial port (usb) to raspberry.
    At the start I want to have only one sensor connected localy to Arduino Maga.

    After setup on serial monitor I can see a lot of log like this:

    0;255;3;0;14;Gateway startup complete.
    0;255;0;0;17;2.1.1
    0;1;0;0;0;
    0;255;3;0;9;MCO:BGN:STP
    0;255;3;0;11;TakieCos
    0;255;3;0;12;1.0
    0;255;3;0;9;MCO:REG:NOT NEEDED
    0;255;3;0;9;MCO:BGN:INIT OK,TSP=NA
    0;255;3;0;9;MCO:SLP:MS=10000,SMS=0,I1=255,M1=255,I2=255,M2=255
    0;255;3;0;9;MCO:BGN:INIT GW,CP=R-NGA--,VER=2.1.1
    0;255;3;0;14;Gateway startup complete.
    0;255;0;0;17;2.1.1
    0;1;0;0;0;
    0;255;3;0;9;MCO:BGN:STP
    0;255;3;0;11;TakieCos
    0;255;3;0;12;1.0
    0;255;3;0;9;MCO:REG:NOT NEEDED
    0;255;3;0;9;MCO:BGN:INIT OK,TSP=NA
    0;255;3;0;9;MCO:SLP:MS=10000,SMS=0,I1=255,M1=255,I2=255,M2=255
    0;255;3;0;9;MCO:BGN:INIT GW,CP=R-NGA--,VER=2.1.1
    0;255;3;0;14;Gateway startup complete.
    0;255;0;0;17;2.1.1
    0;1;0;0;0;
    0;255;3;0;9;MCO:BGN:STP
    0;255;3;0;11;TakieCos
    0;255;3;0;12;1.0
    0;255;3;0;9;MCO:REG:NOT NEEDED
    0;255;3;0;9;MCO:BGN:INIT OK,TSP=NA
    0;255;3;0;9;MCO:SLP:MS=10000,SMS=0,I1=255,M1=255,I2=255,M2=255
    0;255;3;0;9;MCO:BGN:INIT GW,CP=R-NGA--,VER=2.1.1
    0;255;3;0;14;Gateway startup complete.
    0;255;0;0;17;2.1.1
    0;1;0;0;0;
    0;255;3;0;9;MCO:BGN:STP
    0;255;3;0;11;TakieCos
    0;255;3;0;12;1.0
    0;255;3;0;9;MCO:REG:NOT NEEDED
    0;255;3;0;9;MCO:BGN:INIT OK,TSP=NA
    0;255;3;0;9;MCO:SLP:MS=10000,SMS=0,I1=255,M1=255,I2=255,M2=255
    0;255;3;0;9;MCO:BGN:INIT GW,CP=R-NGA--,VER=2.1.1
    0;255;3;0;14;Gateway startup complete.

    Could You explain to me why I can see a lot of "Gateway startup complete" information ?


  • Mod

    @ggg welcome to the MySensors community, and congrats on building your first node 🙂

    It looks like the Mega is rebooting all the time. How is it powered?

    If you haven't already, check out https://forum.mysensors.org/topic/666/debug-faq-and-how-ask-for-help/ for how to fix the most common problems (power problems for example 😉 ). Then report back here and we'll help you take the next step.


Log in to reply
 

Suggested Topics

23
Online

11.2k
Users

11.1k
Topics

112.5k
Posts