HI, I used this code for my project: https://learn.adafruit.com/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts/rfm9x-test
and for wiring this: https://learn.adafruit.com/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts/wiring
but I have this is what my serial monitor show "LoRa radio init failed"
can someone help me pls...
Welcome to the MySensors community @Borodi-Adrian
You either need to redefine the default MySensors pins, or wire like this: https://www.mysensors.org/build/connect_radio#rfm69-&-arduino
hi, thx, but is not working, and i use the RFM95 LoRa....what can i do?
@Borodi-Adrian "not working" is not a problem description we can help you much with unfortunately.
See https://forum.mysensors.org/topic/666/debug-faq-and-how-ask-for-help/ for the most common problems and how to fix them. Also see the faq on that page for how to turn on the MySensors debug output and the "How to ask for help" section for the information that usually is needed to help troubleshooting.