SensebenderGatewaySerial Compile errors

[Rayzilt]

Hello!

I'm totally new to this stuff and really exited to explore this more.
I've have purchased an Sensebender Gateway 1.0 and trying to program the default sketch into it.
When I try to compile the default example code i'm getting a lot of 'was not declared in this section' errors.

Running this on Mac OS Sierra 10.12.6

Steps what I've done.

1. Install Arduino 1.8.3
2. Install MySensors 2.1.1 library through the Manage Libraries in Arduino.
3. Install Arduino SAMD Boards 1.6.15 through Board Manager in Arduino.
4. Restarted the software
5. Selected "Arduino/Genuino Zero (Native USB Board)" as Board and the correct COM port.
6. Opened the default example sketch SensebenderGatewaySerial
7. Try to compile

Am I missing something?

Cheers!

Errors:

ensebenderGatewaySerial:93: error: 'LED_BLUE' was not declared in this scope
static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};
^
SensebenderGatewaySerial:93: error: 'LED_RED' was not declared in this scope
static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};
^
SensebenderGatewaySerial:93: error: 'LED_GREEN' was not declared in this scope
static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};
^
SensebenderGatewaySerial:93: error: 'LED_YELLOW' was not declared in this scope
static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};
^
SensebenderGatewaySerial:93: error: 'LED_ORANGE' was not declared in this scope
static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};
^
/Users/rayzilt/Documents/Arduino/SensebenderGatewaySerial/SensebenderGatewaySerial.ino: In function 'void preHwInit()':
SensebenderGatewaySerial:114: error: 'MY_SWC1' was not declared in this scope
pinMode(MY_SWC1, INPUT_PULLUP);
^
SensebenderGatewaySerial:115: error: 'MY_SWC2' was not declared in this scope
pinMode(MY_SWC2, INPUT_PULLUP);
^
SensebenderGatewaySerial:128: error: 'LED_BLUE' was not declared in this scope
digitalWrite(LED_BLUE, led_state);
^
SensebenderGatewaySerial:133: error: 'LED_BLUE' was not declared in this scope
digitalWrite(LED_BLUE, LOW);
^
SensebenderGatewaySerial:144: error: 'LED_GREEN' was not declared in this scope
digitalWrite(LED_GREEN, HIGH);
^
SensebenderGatewaySerial:148: error: 'LED_YELLOW' was not declared in this scope
digitalWrite(LED_YELLOW, HIGH);
^
SensebenderGatewaySerial:153: error: 'LED_ORANGE' was not declared in this scope
digitalWrite(LED_ORANGE, HIGH);
^
SensebenderGatewaySerial:170: error: 'LED_RED' was not declared in this scope
digitalWrite(LED_RED, HIGH);
^
/Users/rayzilt/Documents/Arduino/SensebenderGatewaySerial/SensebenderGatewaySerial.ino: In function 'bool testSDCard()':
SensebenderGatewaySerial:222: error: 'MY_SDCARD_CS' was not declared in this scope
if (!card.init(SPI_HALF_SPEED, MY_SDCARD_CS)) {
^
/Users/rayzilt/Documents/Arduino/SensebenderGatewaySerial/SensebenderGatewaySerial.ino: In function 'bool testAnalog()':
SensebenderGatewaySerial:271: error: 'MY_BAT_DETECT' was not declared in this scope
int bat_detect = analogRead(MY_BAT_DETECT);
^
exit status 1
'LED_BLUE' was not declared in this scope

[tbowmo]

@Rayzilt

Have you installed board support package for the gateway?

https://github.com/mysensors/ArduinoBoards

Then choose the Sensebender Gateway as target

[Rayzilt]

No sir! Exactly what I was missing!

Thank you for the information