RelayWithButtonActuator Example with touch sensor

[C.r.a.z.y.]

I tried RelayWithButtonActuator Example with touch sensor but didnt work.
When i touch serial prints 111111111.... but relay state doesnt change.
After 3-5 secs touching it stops printing like this;

1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
send: 0-0-0-0 s=1,c=1,t=2,pt=2,l=2,st=fail:1

[BulldogLowell]

@C.r.a.z.y.

Looks like the sensor may need de-bouncing.

What are you using to check that? A simple sketch that toggles the on- board led on pin 13 would be easiest.

[hek]

Are you powering the relay separately?

[C.r.a.z.y.]

@BulldogLowell I am using original sketch didnt make any change.

@hek Only touch sensor was powered separately.

Same power source for touch and relay result;
It stopped working after getting 2 touch at the end of 2 rows print.

repeater started, id 0
send: 0-0-0-0 s=255,c=0,t=18,pt=0,l=5,st=fail:1.4.1
send: 0-0-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
send: 0-0-0-0 s=255,c=3,t=11,pt=0,l=14,st=fail:Relay & Button
send: 0-0-0-0 s=255,c=3,t=12,pt=0,l=3,st=fail:1.0
send: 0-0-0-0 s=1,c=0,t=3,pt=0,l=5,st=fail:1.4.1
send: 0-0-0-0 s=1,c=1,t=2,pt=2,l=2,st=fail:1
send: 0-0-0-0 s=1,c=1,t=2,pt=2,l=2,st=fail:1

[BulldogLowell]

@C.r.a.z.y.

what kind of touch sensor do you have?

[C.r.a.z.y.]

@BulldogLowell http://www.dx.com/p/catalex-digital-capacitive-touch-sensor-switch-module-for-arduino-blue-black-230867#.VJWV4sgM

catalex

[BulldogLowell]

@C.r.a.z.y.

yeah.... those are VERY bouncy.

are you interrupt triggering or just using a state change?

post your code, let's make sure you have it de-bounced enough.