💬 MySensors Gateway for Raspberry PI

[gohan]

Look on the link on the opening post

[pepson]

@gohan
You mean this
https://www.openhardware.io/view/470/MySensors-Gateway-for-Raspberry-PI

Install RFM69HW and then create the same for NRF24L01 on SPI1 ?

[llegoff]

hello,
i have update the description page (it is not automaticaly syncronize with my github page)

OK for AMS1117-3.3

[pepson]

What you update info ?

[llegoff]

edit file Makefile : replace the string mysgw by mysgwSecond (in nano use Ctrl + \ )

copy file initscripts/mysgw.systemd and initscripts/mysgwSecond.sysvinit to initscripts/mysgwSecond.systemd and initscripts/mysgwSecond.sysvinit

cp initscripts/mysgw.systemd initscripts/mysgwSecond.systemd
cp initscripts/mysgwSecond.sysvinit initscripts/mysgwSecond.sysvinit
edit file initscripts/mysgwSecond.systemd and initscripts/mysgwSecond.sysvinit : replace the string mysgw by mysgwSecond (in nano use Ctrl + \ ) and replace the string MySensors Gateway by MySensors Gateway 2

[sineverba]

Wonderful project... I did re-create on Eagle. First radio (RFM) works very well. Second instance, I got a wonderful... "Can't open SPI device: /dev/spidev1.0". After editing the boot/config.txt, need to reboot? Thank you very much

[sineverba]

Oh, also, need to re-write the instructions. In --development branch nowadays there is no option "-d" default start in debug mode... Just to help you wuth mantain instructions aligned

[gohan]

You need reboot

[mfalkvidd]

@sineverba instructions are aligned with the current stable version. We would confuse people mightily if the instructions did not work with stable.

[sineverba]

@mfalkvidd said in 💬 MySensors Gateway for Raspberry PI:

@sineverba instructions are aligned with the current stable version. We would confuse people mightily if the instructions did not work with stable.

You write use development. ATM development doen't have anymore the -d flag ... But not a big problem at the end

[mfalkvidd]

@sineverba oh. I didn't know that. Sorry. where do we write to use development?

[sineverba]

@mfalkvidd I'm Sorry. For error I did confuse "official" page with OpenHardware project for double gateway. Sorry 😖

[mfalkvidd]

@sineverba I see :) Thanks for clarifying.