Problems building a Raspberry Pi ethernet gateway
-
I'm trying to build the above, following instructions here:
https://www.mysensors.org/build/raspberryBut I'm confused by the fact that the RPi branch here:
https://github.com/mysensors/Raspberry
says "DEPRECATED"Is it the case that the RPi code is now part of the master branch?
I am trying to run a controller (openLuup) on the same board as the gateway. It appears to receive messages from the MySensors network, but inclusion fails (does nothing.) I'm somewhat at a loss as to how to proceed.
It all used to work so well 18 months ago with earlier versions and an Arduino Gateway. Is it a problem that I am using the latest gateway version, but my sensors are running an old (1.4?) firmware version?
Thanks for any guidance on this. It's quite a while since I did any Arduino development, so it's taking some time to get back up to speed. Lots seems to have changed (for the good!) in the meantime.
AK
-
I'm trying to build the above, following instructions here:
https://www.mysensors.org/build/raspberryBut I'm confused by the fact that the RPi branch here:
https://github.com/mysensors/Raspberry
says "DEPRECATED"Is it the case that the RPi code is now part of the master branch?
I am trying to run a controller (openLuup) on the same board as the gateway. It appears to receive messages from the MySensors network, but inclusion fails (does nothing.) I'm somewhat at a loss as to how to proceed.
It all used to work so well 18 months ago with earlier versions and an Arduino Gateway. Is it a problem that I am using the latest gateway version, but my sensors are running an old (1.4?) firmware version?
Thanks for any guidance on this. It's quite a while since I did any Arduino development, so it's taking some time to get back up to speed. Lots seems to have changed (for the good!) in the meantime.
AK
@akbooer yes the rpi code is now part of master branch.
All nodes in a MySensors network need to use the same major version. So if you prefer to keep your nodes at 1.4 you need to use the deprecated version. I do that for some nodes that I don't see any benefit to upgrade.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login