What did you build today (Pictures) ?

[fernando alvarez buylla]

well today finally i decide to change to c.h.i.p. as a controller with domoticz an amazing device but too bad for the product that got really bad customer support, ( if you planning to buy a c.h.i.p. read the forum first to get all the problems)

this is my controller using a chip, arduino nano

planing to chage the nano to a nodemcu

[NeverDie]

@fernando-alvarez-buylla Is the C.H.I.P. better than a Raspberry Pi Zero? At least with a Pi, you know there's going to be support.
https://www.adafruit.com/product/2885?gclid=EAIaIQobChMIrMm-lcv-1wIVxSSBCh1PJQB3EAQYASABEgItsvD_BwE
https://www.adafruit.com/product/3400

[fernando alvarez buylla]

@neverdie go for the pi zero chip is really nice a little better than the pi zero wifi and bt integraded 4gb and a few cool stuff , but theres people that pay a year ago and still waiting for the chip to arrive , no reply and no support on forum , to me chip is dying , you cant never go wrong with a pi , but i will try in a few months the omega2 to remplace my chips

[Nca78]

@fernando-alvarez-buylla said in What did you build today (Pictures) ?:

i will try in a few months the omega2 to remplace my chips

What kind of controller are you going to run on that underpowered thing ? Entry level price is cheap but if you want SD card reader and a bit more storage (32Mb) you have to pay 20$, more than the price of an orange pi zero + box which is already available and runs well with Armbian.

[Nca78]

Working on clearing up the backlog of unfinished NModule shields, today I finished to test the dual touch button shield, made a script to use it as on/off button or as dual button with short press = on and long press = off, as seen below as a dual scene controller.
https://www.youtube.com/watch?v=064Jlx2eawI

I made a box so it can be easily customized depending on what you use it for. Unfortunately internet is too bad at the moment in Vietnam to use Fusion 360 so I made it with 123D Design which is less convenient and it's not really high-end assembly :D

[NeverDie]

@nca78 said in What did you build today (Pictures) ?:

I made a box so it can be easily customized depending on what you use it for.

Is it a 3D printed enclosure then, or did you find some other way to make it? Looks very nice.

[Nca78]

@neverdie said in What did you build today (Pictures) ?:

@nca78 said in What did you build today (Pictures) ?:

I made a box so it can be easily customized depending on what you use it for.

Is it a 3D printed enclosure then, or did you find some other way to make it? Looks very nice.

3D printed. Bottom of prints can look pretty good if find the good settings and print on a glass surface.

[dbemowsk]

@nca78 I would assume that pads 1 and 2 are capacitive touch surfaces, correct? very nice design.

[Nca78]

@dbemowsk said in What did you build today (Pictures) ?:

@nca78 I would assume that pads 1 and 2 are capacitive touch surfaces, correct? very nice design.

Thank you !
Yes using dirt cheap TTP223 breakouts at the back so no SMD soldering needed.

[NeverDie]

I received the next version of the leak detector PCB today. Putting it together, it checks out: thanks to a change in layout, it has the same board size as before, but now no clearance issues. i.e. No need for Kapton tape!

If I had had my own PCB CNC etcher, it would have saved me the time I lost waiting for the earlier version from the fab, only to find out that the clearances were too tight and that I would have to re-do it. Looking forward to not having such delays ever again.

[wergeld]

Christmas wreathe for the techie in all of us.
pretty colors
flashing
wire wrapping

Uses a pro mini and a lot of wire-wrapping. Other components on the circuit boards are just there for show.

(ugh, google photos links not showing up so converted to links)

[dbemowsk]

@wergeld Hadn't thought of it that way... Good call....

[reinhold]

Finally got the PCBs from AllPCB.com (cost 5 Euros and took a total of 7 days from order submission to free DHL delivery to Europe!!!) for my own MySensors Arduino Pro Mini prototyping board. Unfortunately the soldering iron broke during my assembly, so it's not fully finished and I couldn't test it yet, either...

This board is inspired by the Nano IO shields that are offered on AliExpress and improves it further for my needs (and switched to the Pro Mini instead of the Nano).

• Each analog and digital pin of the Pro Mini has its own VCC and GND pins,
• the board also provides its own voltage regulator, solder pins for by NRF24L01+ and RFM69H are provided (plus the 5V->3.3V XC6206 regulator),
• either a tiny 55-pin breadboard or three I²C connectors can be placed on the board.
• One can also use PogoPins instead of soldering the Pro Mini (or headers for it) to burn the bootloader or change fuses on the Pro Mini via the ICSP connector.
  

All design files are available on GitHub: https://www.openhardware.io/view/538/Arduino-Pro-Mini-IO-Shield

[NeverDie]

@reinhold I like how you hid the pin holes for the ICSP underneath the breadboard.

[Yveaux]

A temperature controlled PWM fan controller for my DPS5005 power supply!

The original 2-wire fan that came with the power supply casing made an incredible amount of noise.
Using PWM to reduce its velocity made it even more noisy :imp:

So, I made a fresh start and ordered a quality fan (almost as expensive as the whole casing...)

Using nothing more than a 5V pro mini, piezo speaker, DS18B20 temperature sensor and a resistor I made a full fledged fan controller ;-)

It takes the current temp from the DS18B20 (which will be mounted on the heatsink) and ramps up the fan linearly in the 30..60 C range. Below 30 C, the fan is off.
If RPM readback indicates a stalled fan, or DS18B20 returns wrong values the buzzer will force me to invest what's wrong :muscle:

[mfalkvidd]

@yveaux next step is to use the piezo for active noise cancelling ;-)

[Yveaux]

@mfalkvidd don't tempt me...

[gohan]

@yveaux that looks like a Noctua fan. I have a DPS5015 and I was planning to make some mods on the case (I got the other model that is bigger), so I guess I am gonna ask you for some code :D

[Nca78]

@yveaux said in What did you build today (Pictures) ?:

The original 2-wire fan that came with the power supply casing made an incredible amount of noise.
Using PWM to reduce its velocity made it even more noisy :imp:

Less funny that way but did you try to lower the PWM frequency of the atmega to it's minimum ? I had the same problem with the fan I put in my fridge cabinet and low PWM frequency solved it.

[Yveaux]

@nca78 I did fiddle with the frequency, but the fan was just total crap, so I decided to replace it anyhow.