Sensor on gateway
-
Hello,
Is it possible to add some sensors (for example: DS18B20) physically to gateway?
I am using Pidome as a controller and I am able to pass the data from other NRF24 connected with arduino through gateway(with standard sketch), however I do not know how to send the data stored locally form sensors on the gateway and pass it to controller.Best regards
Darek -
It should be possible to connect sensors to the gateway and pass it to the controller but I have not seen anybody doing it so probably you will have to write/merge the code yourself.
-
You have to rewrite part of MyGateWay.cpp or create your own class. It is not that easy that it looks like at first glance. I did it but it didn't end up in that good functionality so I skipped it and made a separte sensor and keept the Gateway unchanged.
You have another answer in the same direction here: http://forum.mysensors.org/topic/722/is-it-possible-to-have-an-ethernet-gateway-also-act-as-a-node-single-arduino-setup/4
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login