Push variable from domoticz to node?
-
I'm new to Domoticz and MySensors.
I've built a motion/door sensor node that turns on lights in the garage. At first I coded it so the Arduino node in the garage had logic to turn on the lights and maintain the countdown timer. Then later I moved the logic over to Domoticz Event script. Both work but I was thinking if the Domoticz Controller node was offline then my garage lights would fail to work. So I'd like to do a hybrid where Domoticz can send some parameter variables that get stored in the eprom of the arduino. e.g. Light On Countdown time.
Are variables pushed using V_VAR1-5?
https://www.mysensors.org/download/serial_api_20Thanks.
-
I'm new to Domoticz and MySensors.
I've built a motion/door sensor node that turns on lights in the garage. At first I coded it so the Arduino node in the garage had logic to turn on the lights and maintain the countdown timer. Then later I moved the logic over to Domoticz Event script. Both work but I was thinking if the Domoticz Controller node was offline then my garage lights would fail to work. So I'd like to do a hybrid where Domoticz can send some parameter variables that get stored in the eprom of the arduino. e.g. Light On Countdown time.
Are variables pushed using V_VAR1-5?
https://www.mysensors.org/download/serial_api_20Thanks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login