I got a plug-and-play NRF24 shield for the Pi on Aliexpress
I want to give workshops with MySensors in which I want to make connecting things as simple as possible. That's why I bought this "Raspi Wireless Shield v1.0" from Aliexpress:
The short version
I traced the pins to their origin, as they are not perfectly connected to the same pins MySensors normally uses.
NRF24 -> PI GPIO -> PI PIN
IRQ = ?? unconnected?
MO = io10 = 19 (normal)
CSN = io8 = 24 (normal)
VCC = 3.3v (normal)
MI = io9 = 21 (normal)
SCK = io11 = 23 (normal)
CE = io18 = 12 (different!)
GND = GND (normal)
The board also supports plugging in the RFM12B 433Mhz transceiver. That thing is another story for another thread.
It's a mysterious shield: and learning more about it took some detective work. The shield itself has some markings: a nice metalic "GEEKROOM" logo (found nothing on that..), and an almost invisible "ukonline2000" logo as well. That last name is from ukonline2000.com which seems to be a Chinese website with Raspberry Pi news. The earliest mention of the board I found was this one.
In order to use this board you only need to add this parameter to the configure command:
The board also has a built-in multicolor LED. I'll see what happens when I use this:
--my-leds-rx-pin=32 or --my-leds-rx-pin=15
Probably nothing, since it should in theory be driven via PWM af 50hz.
@mfalkvidd Sounds interesting! Could you explain that a bit more? The page you link to doesn't offer any details on what it is.