Node request temperature from gateway

Daniel Rus

Hi guys,

I am trying for the last days to make the gateway to send data to node.
Till now i dont have any luck , i am using an Arduino Nano for the node and and Arduino Mega with Ethernet adapter.
Below is my gateway code:


#define MY_RADIO_NRF24
#define MY_RF24_CE_PIN 6
#define MY_RF24_CS_PIN 4
#define MY_SOFTSPI
#define MY_GATEWAY_SERIAL
#include <SPI.h>
#include <MySensors.h>
#define CHILD_ID 4   // Id of the sensor child
MyMessage msg(CHILD_ID, V_TEMP);

void setup()
{  }

void presentation()  {
  present(CHILD_ID, S_TEMP);
}

void loop()
{ float temperature = 99; // dht.getTemperature();
  send(msg.set(temperature, 1));

}

void receive(const MyMessage &message) {

}

and the code for the node is :


#include <SPI.h>
#define MY_RADIO_NRF24
#define MY_RF24_CE_PIN 10
#define MY_RF24_CS_PIN 9
#define MY_NODE_ID 2
#include <MySensors.h>

void setup()
}
void presentation()
{
}

void loop()
{ request(4, V_TEMP, 0);
}

void incomingMessage(const MyMessage &message) {
  if (message.type == V_TEMP) {
    Serial.print("Incoming change for sensor:");
    Serial.print(message.sensor);
    Serial.print("\n");
    Serial.print(", New status: ");
    Serial.println(message.getFloat());

  }
}

The serial from the node:

0;4;1;0;0;99.0
2;4;2;0;0;
2;4;2;0;0;
0;4;1;0;0;99.0
2;4;2;0;0;
2;4;2;0;0;
0;4;1;0;0;99.0
2;4;2;0;0;
0;4;1;0;0;99.0
0;4;1;0;0;99.0
2;4;2;0;0;
0;4;1;0;0;99.0

In the serial from the node with debug activated:

__  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
        |___/                      2.3.0

16 MCO:BGN:INIT NODE,CP=RNNNA---,VER=2.3.0
25 TSM:INIT
26 TSF:WUR:MS=0
33 TSM:INIT:TSP OK
35 TSM:INIT:STATID=2
37 TSF:SID:OK,ID=2
39 TSM:FPAR
75 TSF:MSG:SEND,2-2-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
585 TSF:MSG:READ,0-0-2,s=255,c=3,t=8,pt=1,l=1,sg=0:0
589 TSF:MSG:FPAR OK,ID=0,D=1
2082 TSM:FPAR:OK
2083 TSM:ID
2084 TSM:ID:OK
2086 TSM:UPL
2089 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
2096 TSF:MSG:READ,0-0-2,s=255,c=3,t=25,pt=1,l=1,sg=0:1
2101 TSF:MSG:PONG RECV,HP=1
2103 TSM:UPL:OK
2105 TSM:READY:ID=2,PAR=0,DIS=1
2109 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100
2116 TSF:MSG:READ,0-0-2,s=255,c=3,t=15,pt=6,l=2,sg=0:0100
2123 TSF:MSG:SEND,2-2-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.3.0
2131 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0
4140 TSF:MSG:SEND,2-2-0-0,s=4,c=0,t=6,pt=0,l=0,sg=0,ft=0,st=OK:
4146 MCO:REG:REQ
4149 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2
4155 TSF:MSG:READ,0-0-2,s=255,c=3,t=27,pt=1,l=1,sg=0:1
4160 MCO:PIM:NODE REG=1
4163 MCO:BGN:STP
ok
4164 MCO:BGN:INIT OK,TSP=1
4168 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4176 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4186 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4194 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4201 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4208 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4216 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4224 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4232 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4239 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4246 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4254 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4261 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4269 TSF:MSG:SEND,2-2-0-0,s=4,c=2,t=0,pt=0,l=0,sg=0,ft=0,st=OK:

mfalkvidd

Welcome to the MySensors community @daniel-rus

A gateway does not store any data. You need to use a controller. It looks like there is no controller in your system?

If you haven’t already, see https://www.mysensors.org/about/network for an overview of how MySensors works.

Daniel Rus

@mfalkvidd Hi, I manage to make an MQTT gateway with home assistant as controller .
The serial from gateway i can see that the gateway send data out from MQTT, but the node still not receive anything

870503 TSF:MSG:READ,2-2-0,s=3,c=2,t=0,pt=0,l=0,sg=0:
870508 GWT:TPS:TOPIC=mygateway1-out/2/3/2/0/0,MSG SENT
870569 GWT:TPS:TOPIC=mygateway1-out/0/4/1/0/47,MSG SENT
870587 GWT:TPS:TOPIC=mygateway1-out/0/3/1/0/0,MSG SENT
871604 TSF:MSG:READ,2-2-0,s=3,c=2,t=0,pt=0,l=0,sg=0:
871609 GWT:TPS:TOPIC=mygateway1-out/2/3/2/0/0,MSG SENT
871670 GWT:TPS:TOPIC=mygateway1-out/0/4/1/0/47,MSG SENT
871687 GWT:TPS:TOPIC=mygateway1-out/0/3/1/0/0,MSG SENT

Node request temperature from gateway

39

12.1k

11.2k

113.4k