[SOLVED] Gateway & Node communication work when on W10 but not on my Ubuntu Computer

[Arnaud]

Hi everyone, I’m new in MySensors community, and I hope you can help me !

I’m using an homemade Ubuntu 16.04LTS Server with JeeDom installed on and I’m tring to connect MySensors Gateway and Node. I’m using MySensors 2.3.0 library.

For my GW, I’m using a serial GW made with Arduino Nano (chinese clone) with NRF24L01+ & 2dbi antenna (chinese clone also). On this GW I put a 47µF capacitor as recommanded
My GW look like the GW in the official MySensors Site https://www.mysensors.org/build/serial_gateway in Demonstration part.
I haven’t made any change in the sktech that I upload in my GW, GatewaySerial.ino

For my Node, I’m using a Arduino Pro Mini (chinese clone) with NRF24L01+ & 2dbi antenna (chinese clone also) with the 47µF capacitor.
This Node is Battery powered (2xAA) with a step-up voltage regulator (0.8-3.3 to 3.3v) and a BMP280

When I plug the GW on my Windows 10 Computer, openning the Arduino IDE (1.8.4), and openning Serial port monitor @115200, let the GW start then power up my node I have this output :

0;255;3;0;9;0 MCO:BGN:INIT GW,CP=RNNGA---,VER=2.3.0
0;255;3;0;9;4 TSM:INIT
0;255;3;0;9;6 TSF:WUR:MS=0
0;255;3;0;9;14 TSM:INIT:TSP OK
0;255;3;0;9;17 TSM:INIT:GW MODE
0;255;3;0;9;20 TSM:READY:ID=0,PAR=0,DIS=0
0;255;3;0;9;23 MCO:REG:NOT NEEDED
0;255;3;0;14;Gateway startup complete.
0;255;0;0;18;2.3.0
0;255;3;0;9;28 MCO:BGN:STP
0;255;3;0;9;34 MCO:BGN:INIT OK,TSP=1
0;255;3;0;9;7552 TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;7558 TSF:MSG:BC
0;255;3;0;9;7560 TSF:MSG:FPAR REQ,ID=255
0;255;3;0;9;7564 TSF:CKU:OK,FCTRL
0;255;3;0;9;7567 TSF:MSG:GWL OK
0;255;3;0;9;8007 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
0;255;3;0;9;9566 TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;9572 TSF:MSG:BC
0;255;3;0;9;9575 TSF:MSG:FPAR REQ,ID=255
0;255;3;0;9;9578 TSF:CKU:OK,FCTRL
0;255;3;0;9;9581 TSF:MSG:GWL OK
0;255;3;0;9;9989 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
0;255;3;0;9;11582 TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;11588 TSF:MSG:BC
0;255;3;0;9;11590 TSF:MSG:FPAR REQ,ID=255
0;255;3;0;9;11594 TSF:CKU:OK,FCTRL
0;255;3;0;9;11597 TSF:MSG:GWL OK
0;255;3;0;9;11972 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
0;255;3;0;9;13597 TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;13603 TSF:MSG:BC
0;255;3;0;9;13606 TSF:MSG:FPAR REQ,ID=255
0;255;3;0;9;13609 TSF:CKU:OK,FCTRL
0;255;3;0;9;13614 TSF:MSG:GWL OK
0;255;3;0;9;13956 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
0;255;3;0;9;25640 TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;25648 TSF:MSG:BC
0;255;3;0;9;25650 TSF:MSG:FPAR REQ,ID=255
0;255;3;0;9;25654 TSF:PNG:SEND,TO=0
0;255;3;0;9;25657 TSF:CKU:OK
0;255;3;0;9;25660 TSF:MSG:GWL OK
0;255;3;0;9;25761 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
0;255;3;0;9;27657 TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;27663 TSF:MSG:BC
0;255;3;0;9;27666 TSF:MSG:FPAR REQ,ID=255
0;255;3;0;9;27670 TSF:CKU:OK,FCTRL
0;255;3;0;9;27673 TSF:MSG:GWL OK
0;255;3;0;9;27740 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
0;255;3;0;9;29672 TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;29679 TSF:MSG:BC
0;255;3;0;9;29681 TSF:MSG:FPAR REQ,ID=255
0;255;3;0;9;29685 TSF:CKU:OK,FCTRL
0;255;3;0;9;29688 TSF:MSG:GWL OK
0;255;3;0;9;30746 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
0;255;3;0;9;31688 TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;31694 TSF:MSG:BC
0;255;3;0;9;31697 TSF:MSG:FPAR REQ,ID=255
0;255;3;0;9;31700 TSF:CKU:OK,FCTRL
0;255;3;0;9;31704 TSF:MSG:GWL OK
0;255;3;0;9;32730 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0

So I think that my GW & Node are Working (My Node doesn’t have a Node ID, maybe should I fix it ? Node ID set to 1)

But when I did the same thing on my Ubuntu computer I have this :

0;255;3;0;9;0 MCO:BGN:INIT GW,CP=RNNGA---,VER=2.3.0
0;255;3;0;9;4 TSM:INIT
0;255;3;0;9;6 TSF:WUR:MS=0
0;255;3;0;9;14 TSM:INIT:TSP OK
0;255;3;0;9;17 TSM:INIT:GW MODE
0;255;3;0;9;20 TSM:READY:ID=0,PAR=0,DIS=0
0;255;3;0;9;23 MCO:REG:NOT NEEDED
0;255;3;0;14;Gateway startup complete.
0;255;0;0;18;2.3.0
0;255;3;0;9;28 MCO:BGN:STP
0;255;3;0;9;34 MCO:BGN:INIT OK,TSP=1
u¥ä‰ütúóa¸°š[àó;ñ

It’s look like the bautrate isn’t the good one.

I’ve try to :

• change my GW by a Pro Mini @34800 (by changing the MySensor.h)
• Fix my bautrate directly in Ubuntu

but it’s the same …

Edit :
Log of my node, Radio appares to not work, i will try to change my Radio module and keep browsing the web for help on this ...

 
 __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
        |___/                      2.3.0

16 MCO:BGN:INIT NODE,CP=RNNNA---,VER=2.3.0
26 TSM:INIT
28 TSF:WUR:MS=0
34 TSM:INIT:TSP OK
36 TSM:INIT:STATID=1
38 TSF:SID:OK,ID=1
40 TSM:FPAR
77 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2088 !TSM:FPAR:NO REPLY
2091 TSM:FPAR
2127 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4136 !TSM:FPAR:NO REPLY
4139 TSM:FPAR
4175 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6184 !TSM:FPAR:NO REPLY
6187 TSM:FPAR
6223 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8232 !TSM:FPAR:FAIL
8235 TSM:FAIL:CNT=1
8237 TSM:FAIL:DIS
8239 TSF:TDI:TSL
18241 TSM:FAIL:RE-INIT
18243 TSM:INIT
18249 TSM:INIT:TSP OK
18253 TSM:INIT:STATID=1
18255 TSF:SID:OK,ID=1
18257 TSM:FPAR
18294 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
20303 !TSM:FPAR:NO REPLY
20305 TSM:FPAR
20342 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
22351 !TSM:FPAR:NO REPLY
22353 TSM:FPAR
22390 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
24399 !TSM:FPAR:NO REPLY
24401 TSM:FPAR
24438 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
26447 !TSM:FPAR:FAIL
26449 TSM:FAIL:CNT=2
26451 TSM:FAIL:DIS
26454 TSF:TDI:TSL
36458 TSM:FAIL:RE-INIT
36460 TSM:INIT
36466 TSM:INIT:TSP OK
36470 TSM:INIT:STATID=1
36472 TSF:SID:OK,ID=1
36474 TSM:FPAR
36511 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
38520 !TSM:FPAR:NO REPLY
38522 TSM:FPAR
38559 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
40568 !TSM:FPAR:NO REPLY
40570 TSM:FPAR
40607 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
42616 !TSM:FPAR:NO REPLY
42618 TSM:FPAR
42655 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
44664 !TSM:FPAR:FAIL
44666 TSM:FAIL:CNT=3
44668 TSM:FAIL:DIS
44670 TSF:TDI:TSL
54675 TSM:FAIL:RE-INIT
54677 TSM:INIT
54683 TSM:INIT:TSP OK
54687 TSM:INIT:STATID=1
54689 TSF:SID:OK,ID=1
54691 TSM:FPAR
54728 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
56737 !TSM:FPAR:NO REPLY
56739 TSM:FPAR
56776 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
58785 !TSM:FPAR:NO REPLY
58787 TSM:FPAR
58824 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
60833 !TSM:FPAR:NO REPLY
60835 TSM:FPAR
60872 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
62881 !TSM:FPAR:FAIL
62883 TSM:FAIL:CNT=4
62885 TSM:FAIL:DIS
62887 TSF:TDI:TSL
72890 TSM:FAIL:RE-INIT
72892 TSM:INIT
72898 TSM:INIT:TSP OK
72902 TSM:INIT:STATID=1
72904 TSF:SID:OK,ID=1
72906 TSM:FPAR
72943 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
74952 !TSM:FPAR:NO REPLY
74954 TSM:FPAR
74991 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
77000 !TSM:FPAR:NO REPLY
77002 TSM:FPAR
77039 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
79048 !TSM:FPAR:NO REPLY
79050 TSM:FPAR
79087 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
81096 !TSM:FPAR:FAIL
81098 TSM:FAIL:CNT=5
81100 TSM:FAIL:DIS
81102 TSF:TDI:TSL

Thank You for reading and helping.

PS : Sorry for my English I’m French.

[Arnaud]

~~I solved this problem with :

• Deleting Mysensor from Jeedom
• Adding it and fresh install of dependency~~

It was my connection between my chinese clone of Arduino Nano and my computer, the baud rate wasn't stable switch between 1200 and 115200.

To see the baud rate of a serial port on Ubuntu, use this command : stty -F /dev/ttyXXX

I replace it by a real Arduino Uno, and it work perfectly.

I also change my radio frequency

Thank for reading !

Does anyone know hw to put this thread as Solved ?

[mfalkvidd]

Great work @arnaud, thanks for posting the solution.

To edit the topic title, edit your first post and change the title at the top